@文心快码上传项目出错 problem uploading to board. see https://support.arduino.cc/hc/e 文心快码 上传项目出错通常是由于驱动程序未安装或已损坏、选择了错误的板类型或端口、Arduino IDE与板不兼容、USB线缆故障等原因导致的。 上传项目到Arduino开发板时出错,可以通过以下步骤进行排查和解决: 检查驱动程序: ...
Solved: Hello, I am evaluating the #IM69D130 MEMS microphone, and ran into an issue uploading the files to the #XMC 2GO board using Arduino IDE. The
MacOS 10.15.7, Arduino 1.8.19. Adafruit ESP32 Huzzah. My IDE was working and then suddenly stopped uploading to the ESP32 board with error: java.io.IOException: Cannot run program "___REMOVE___/esptool": error=2, No such file or directory ...
and the board itself. I also tried changing the preference to check compilation and upload but nothing seems to work. I tried resetting the Arduino while uploading and many other fixes from the forums but nothing seems to work. I need help. I have been trying to do this for 3 days and...
board = bluepill_f103c8 framework = arduino upload_port = anything upload_protocol = dfu i had to define upload_port (doesn't matter what...). I still have to reset the board manually right before uploading. Maybe there's a better solution, but I think I'm satisfied for the moment ...
Re: Connecting arduino to mac problem Postbyadafruit_support_rick»Sat Apr 12, 2014 8:18 am Is it the same program running on all three boards? Sometimes, a running program can prevent the uploading of a new program. The solution is to press the reset button immediately before the upload...
Hello! I'm making my own cyton and dongle board and I got an error when uploading the PIC32 firmware and I don't know how to fix it. Here are my steps: 1.
I'm trying to upload my sketch. Hardware: I'm using mac 10.11 and arduino IDE 1.8.13 Board ESP32-C3-DevKitM-1 v1.6 Description: I always used ESP32 with arduino, but a few weeks ago I bought esp32-c3-devkitm-1 and to my surprise when I t...
Again, this worked fine on my arduino board but I get 0 when I connect it to my esp8266.#include <EEPROM.h>#include "GravityTDS.h"#define TdsSensorPin A0GravityTDS gravityTds;float temperature = 21,tdsValue = 0,ec = 0, ppm700 = 0;void setup(){ Serial.begin(115200); gravityTds....
AVAILABLE: arduinoCURRENT: upload_protocol = arduinoLooking for upload port…Auto-detected: COM5Uploading .pio\build\uno\firmware.hexavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x4cavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x45...