int x) { x = x; } //重定义fputc函数 int fputc(int ch, FILE *f) { while((USART1->SR&0X40)==0);//循环发送,直到发送完毕 USART1->DR = (uint8_t) ch; return ch; } #endif 方案二: 新建一个stm32_printf.h 头文件,在main.c 中include#ifndef STM32_SPIDMA_MODE_STM32_PRINT_...
{/*Place your implementation of fputc here*//*e.g. write a character to the USART*/USART_SendData(USART1, (uint8_t) ch);/*Loop until the end of transmission*/while(USART_GetFlagStatus(USART1, USART_FLAG_TC) ==RESET);returnch; } 因printf()之类的函数,使用了半主机模式。使用标准库会...
#pragma import(__use_no_semihosting) //标准库需要的支持函数 struct __FILE { int handle; }; FILE __stdout; //定义_sys_exit()以避免使用半主机模式 _sys_exit(int x) { x = x; } //重定义fputc函数 int fputc(int ch, FILE *f){ // 将这里的 USART1修改为USART2或USART...
USART_SendData(USART1, (uint8_t) ch); /* Loop until the end of transmission */ while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); return ch; } 因printf()之类的函数,使用了半主机模式。使用标准库会导致程序无法运行,以下是解决方法: 方法1.使用微库,因为使用微库的话,不会使用半主...
使用指向参数列表的指针写入格式化的输出。 这些功能有更安全的版本可用;请参阅vsprintf_s、_vsprintf_s_l、vswprintf_s、_vswprintf_s_l。 语法 C intvsprintf(char*buffer,constchar*format, va_list argptr );int_vsprintf_l(char*buffer,constchar*format,_locale_tlocale, va_list ...
usart_interrupt_enable(uartx->uart_x,USART_INT_IDLE); } } if(uartx->uart_mode_tx==MODE_DMA) { if(uartx->uart_tx_dma!=NULL) { driver_dma_com_init(uartx->uart_tx_dma,(uint32_t)&USART_TDATA(uartx->uart_x),NULL,DMA_Width_8BIT,DMA_MEMORY_TO_PERIPH); ...
usart_interrupt_enable(uartx->uart_x,USART_INT_IDLE); } } if(uartx->uart_mode_tx==MODE_DMA) { if(uartx->uart_tx_dma!=NULL) { driver_dma_com_init(uartx->uart_tx_dma,(uint32_t)&USART_DATA(uartx->uart_x),NULL,DMA_Width_8BIT,DMA_MEMORY_TO_PERIPHERAL); ...
STM32串口使用Printf()函数问题
usart_interrupt_enable(uartx->uart_x,USART_INT_IDLE); } } if(uartx->uart_mode_tx==MODE_DMA) { if(uartx->uart_tx_dma!=NULL) { driver_dma_com_init(uartx->uart_tx_dma,(uint32_t)&USART_TDATA(uartx->uart_x),NULL,DMA_Width_8BIT,DMA_MEMORY_TO_PERIPH); ...
(uint32_t)&USART_DATA(uartx->uart_x),NULL,DMA_Width_8BIT,DMA_MEMORY_TO_PERIPHERAL); } } usart_baudrate_set(uartx->uart_x, uartx->baudrate); usart_receive_config(uartx->uart_x, USART_RECEIVE_ENABLE); usart_transmit_config(uartx->uart_x, USART_TRANSMIT_ENABLE); usart_word_...