PPP校验 结束 这是一个PC用MODM拨号上网号,发起TCP连接时发送的数据,用串口监控软件获得的报文。实际上,从串口发出的数据,并不是这样,还需要经过转义(把0x10,0x13或所以不大于0x20的字节转义),再发给对方。 再看一个PPPOE报文样例: 00 90 1A 40 F2 27 00 09 6B 50 A1 14 88 64 11 00 0A 85 00 32...
PPP校验 结束 这是一个PC用MODM拨号上网号,发起TCP连接时发送的数据,用串口监控软件获得的报文。实际上,从串口发出的数据,并不是这样,还需要经过转义(把0x10,0x13或所以不大于0x20的字节转义),再发给对方。 再看一个PPPOE报文样例: 00 90 1A 40 F2 27 00 09 6B 50 A1 14 88 64 11 00 0A 85 00 32...
+++ b/package/network/services/ppp/Makefile @@ -207,6 +207,8 @@ define Package/ppp-mod-pppoe/install $(INSTALL_DIR) $(1)/usr/lib/pppd/$(PKG_VERSION) $(INSTALL_BIN) $(PKG_INSTALL_DIR)/lib/pppd/$(PKG_VERSION)/rp-pppoe.so \ $(1)/usr/lib/pppd/$(PKG_VERSION)/ + $(INSTALL_...
1、PPPOE 拨号常见错误代码及处理方法代码存在问题故障原因解决办法602拨号网络由于 设备安装错误 或正在使用, 不能进行连接RasPPPo 般 有完全和正确的安装卸载干净任何 PPPoE 软件,重新安装(重启一般会恢复)605拨号网络网络 由于设备安装 错误不能设定 使用端口RasPPPo 般 有完全和正确的安装卸载干净任何 PPPoE 软件,...
1.在AP端打印所有PPP的数据。2.如果使用了CMUX的话，可以抓取Modem端MOD_CMUX的log。查看在MOD_CMUX发...
the pppoe (point-to-point protocol over ethernet) and pppoa (point-to-point protocol over atm) for establishing a dsl with customers. services provided by ppp it defines the frame format of the data that needs to be transmitted. ppp defines the procedure behind establishing a link between ...
Overview --- The ACCEL-PPP v1.0 is completly new implementation of PPTP/PPPoE/L2TP/SSTP which was written from scratch. Userspace daemon has its own PPP implementation, so it does not uses pppd and one process (multi-threaded) manages all connections. ACCEL-PPP uses kernel-mode implementations...
The main module implements a PPPoE test client with load testing capability. it could also be used as a starting point to implement your own PPPoE client; It has following key features: Custom VLAN/MAC address without provisioning OS interface (viaetherconn) ...
update: usr/src/uts/common/io/ppp/sppp/sppp_mod.c update: usr/src/uts/common/io/ppp/spppcomp/spppcomp.c update: usr/src/uts/common/io/ppp/sppptun/sppptun.c update: usr/src/uts/common/io/ppp/sppptun/sppptun_impl.h update: usr/src/uts/common/net/sppptun.h ...
而在通信模型中,PROFINE最大的特点是在其用户层是基于组件的,而依靠工程设计模型实现了组件的连接,从而系统中便可接入多个供应商的设备。 4. IDA 与上述3个架构不同,IDA则采用了从设备底层到高层的完全工业以太网构架,这是依靠Mod Bus实现的。 说明:补充资料仅用于学习参考,请勿用于其它任何用途。