服务器行中指定的端口 no port specified in server line 服务器行中指定的端口
¹ For more information about how to customize this port, see Remote Procedure Calls and DCOM in the References section.2 The NETBIOS ports are optional and are not required when DFSN is using FQDN Server names.Distributed File System Replication...
The MAC address is assigned by the system not specified by users. fixed_ips Array offixed_ipobjects Specifies the port IP address. For details, seeTable 7. For example, the value is"fixed_ips": [{"subnet_id": "4dc70db6-cb7f-4200-9790-a6a910776bba", "ip_address": "192.169.25.79...
Cannot use specified source port.Port is already in use.Specify a port that is not in use and run the command again. In the following cases, PortQry uses the specified port for the first test of the query, but not the second test: RPC (TCP and UDP ports 135) LDAP (UDP port 389...
Cannot use specified source port.Port is already in use.Specify a port that is not in use and run the command again. In the following cases, PortQry uses the specified port for the first test of the query, but not the second test: RPC (TCP and UDP ports 135) LDAP (UDP port 3...
¹ For more information about how to customize this port, see Remote Procedure Calls and DCOM in the References section.2 The NETBIOS ports are optional and are not required when DFSN is using FQDN Server names.Distributed File System Replication...
The alarm is generated when a specified port hardware is incompatible. This alarm is generated by the following sensors: PortN Status Attribute Alarm ID Alarm Severity Auto Clear 0x2B02FFFF Major Yes Parameters Name Meaning N Port number Impact on the System The ...
The commonly used format is user@xx.xx.xx.xx -p PortNumber, in which the user name of the SSH server, host IP address, and port number are specified. Configuring the SSH TCP Port Forwarding Function This section describes how to configure the SSH TCP port forwarding function using the rpc...
The port number defines the protocol port used for contacting the server referenced in the URI. If a port is not specified as part of the URI, thePortproperty returns the default value for the protocol. If there is no default port number, this property returns -1. ...
shut down to prevent loops. The port also shuts down when a configured shutdown threshold for the protocol is reached. You can manually reenable the port (issue ashutdown,no shutdowncommand sequence) or if errdisable recovery is enabled, the operation is retried after a specified time ...