4. Go to theMore>Internet Connection>IPv4page to check the WAN IP address of the Deco system. Now you can try to useWAN IP:Port Number(External Port) to access the service from the outside network. Note: If the WAN IP address of the Deco is not a public IP address but a private ...
Step 4: Pay attention to the WAN IP address in the status page If there are still problems, please check the WAN IP of the router. Verify the router is getting a public IP address. If it is a private IP address, which means it's not enough to only open the port on the TP-Link,...
If I set them up as a virtual server and check if the ports are open online, they are but it doesn't work and can't connect to my cctv. Last night I also tried disabling all traffic management and DHCP from the Huawei and handing it over to the TPlink Decos, ...
Step 2: Check the port forwarding settings in the router. To set up the virtual server, refer to FAQ--How to set up Port Forwarding feature on TP-Link SMB Router? Verify that the internal port, external port, and Internal Server IP are correct. And it’s recommended to set up DHCP r...
1. Launch the Deco app, tapMore->Advanced->NAT Forwarding->Port Forwarding. 2. Tap+icon at the upper right corner or click onAdd Port Forwarding Ruleto add a rule. 3. Choose aService Type, type in theService Name, and tapInternal IPto select a device you want to open ports for, ...