报错信息:Web server failed to start. Port 8080 was already in use. 报错原因:端口被占用 解决方法: 解决方法一:修改端口 修改配置文件,加上参数:server.port=8014 或者在application.yml文件中添加 server: port: 8014 在访问时,替换对应的端口号即可 解决方法二:关闭占用端口的进程 使用cmd查看端口号占用情况...
1、我首先使用如下脚本命令: netstat -ano|findstr "8080" 1. 没有发现被占用的端口进程。 2、然后我又改了个端口,使用8088端口,还是报这个错误。 最终没找到原因,更新了下程序,重新启动机器就好了。 我怀疑是我的进程重启了,重启的时候还没停完,所以会报端口一直被占用。至于为什么会重启,仍不知道什么原因造成...
安装文件发现端口8088已经被占用。可以联系硬件维护人员调试。供参考。
EDIT 7: I just tried out running without any custom configuration (everything commented out, otherwise influxdb wants a valid config file) and still the same error pops up.run: open server: listen: listen tcp 127.0.0.1:8088: bind: address already in use) EDIT 8: Downgraded manually to 1....
run: open server: listen: listen tcp 127.0.0.1:8088: bind: address already in use I verified there is nothing running on this port, additionally I also tried to use different port in influxdb.conf,bind-address = ":18088"however it still doesn't work giving merun: open server: listen:...
portal.http.port=8088 portal.https.port=8843 However, once the controller is initialized, your changes to the ports in this file will not take effect, and your changes to the ports on the controller webpage will not be synchronized to this file. That is, even if you have already changed...
With the standard port of 8081 in use, overriding the port to 8088 does not work. When running the iOS app, the app will still look for port 8081. React Native version: System: OS: macOS 10.15.1 CPU: (12) x64 Intel(R) Core(TM) i7-8850H C...
I need to forward 2 ports from an external IP to an internal private ip (Ports 8088 and 22). I found this article and am following its example:https://nubisnovem.com/pinning-a-hole-in-palo-alto/ Public/Outside IP of PA-220 : 44.44.44.44 ...
1 docker: Error response from daemon: Conflict. The container name"/identity1"is alreadyinuse by container"080317b0a43bbd6da8556fbef2cd70a5178d2685fccca3ea2d79b668088a8148". You have to remove (or rename) that container to be able to reuse that name. ...
I have deliberately tested tcp ports where I know the inbound traffic arrives fine, for example, 3389 or 8088. I don't see how "inspecting" the outbound traffic is going to make it any more likely for the inbound traffic to arrive, since packets are already arriving on the inbound side...