(vethb1fdb9d) entered blocking state console | [ 894.140562] br-1b93153a392b: port 3(vethb1fdb9d) entered forwarding state console | INFO[04-19 02:12:11] add forward spec="{0.0.0.0 53 udp}" time="04-19 10:13:43" level=error msg="UDP proxy conn ReadFrom() failed: read udp...
=03 A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=02 Prot=01 A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=02 Prot=01 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=8c(I) Atr=03(Int.) MxPS= 16 Ivl=4096ms I:* If#= 1 ...
Network 1 (eth0) Interface Configuration Network 1 Ethernet Link Network 1 (eth0) Interface Status This page shows the status of the Ethernet network interface. To view the network interface status: 1. Click Network on the menu then click Network 1 > Interface > Status at the ...
While looking at another issue, I observed a strange behavior: the Antrea Agent thought that the ofport for the tunnel port (antrea-tun0) was 4, while in reality it was 1 (which is the desired value, and how we set ofport_request when creating the tunnel port). This meant that the ...
Maintainer: @feckert Environment: LEDE Reboot SNAPSHOT r4683-370aacf532 / LuCI Master (git-17.219.56366-102199f) Running on an armada 370 device witch two pppoe wan interface,two tinc vpn connection and one 6in4 connection. Description: ...
version: OpenWrt 21.02.3 kernel version: 5.4.188 my board have three PCIe device, just can use first 2 device, third device cannot detected [ 1.298144] rt2880-pinmux pinctrl: pcie is already enabled [ 1.309225] mt7621-pci-phy 1e149000.pc...
iptables -t nat -A POSTROUTING -o wg0 -j MASQUERADE iptables -A FORWARD -i wg0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth1 -o wg0 -j ACCEPT echo "$(date): Internet Sharing DONE!" If you wish to enable port forwarding and setup the ...
Oct 12 21:34:49 phy kernel: [12286.910151] docker0: port 1(vethafba9bc) entered forwarding state I think something stuck when I tried to create a 2th layer using port map 50000 with my previous tests and now I cannot use that port any more neither it is really free in the os. ...
1 :: END /etc/pivpn/NO_UFW :: :: START /etc/pivpn/pivpnINTERFACE :: eth0 :: END /etc/pivpn/pivpnINTERFACE :: :: START /etc/pivpn/setupVars.conf :: pivpnUser=pi UNATTUPG=unattended-upgrades pivpnInterface=eth0 IPv4dns=192.168.1.1 IPv4addr=192.168.1.20 IPv4gw=192.168.1.1 pivpn...