PNOZ_s4_安全继电器手册.pdf,PNOZ s4 } Safety relays Operating Manual-21396-EN-16 Preface This document is the original document. All rights to this documentation are reserved by Pilz GmbH Co. KG. Copies may be made for the users internal purposes. Suggest
PNOZ s4的两路安全通道,可以连接成单通道型(不带触点间短路检测)或者双通道型;双通道型又可以分为带触点间短路检测型和不带触点间短路检测型;下图是不带触点间短路检测的急停按钮接线方法: 下图是带触点间短路检测的安全门及急停按钮的双通道接线原理图: 下面来谈谈PNOZ s4的复位/启动功能。该安全继电器支持如下几...
Pilz PNOZ s4 750904 产品说明书PNOZ s4 (10pcs.) 750904 PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/ without detection of shorts across contacts, manual/automatic start, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 22.5 mm, plug-in screw terminals, ...
在自动复位/启动(automatic start)模式下,当安全通道闭合后,安全继电器会自动就绪; 在手动复位/启动(manual start)模式下,当安全通道闭合,并且启动电路闭合后,安全继电器会就绪; 在下降沿监测复位/启动(Mornitored start with falling edge)模式下,当安全通道闭合,并且启动电路闭合然后断开后,安全继电器会就绪; 在上升...
pnozS4手册 Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Block diagram PNOZ s4 ◆ Pilz GmbH & Co. KG, Felix-Wankel-Stra?e 2, 73760 Ostfildern, Germany 1001742-EN-05-2012-03 Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: *** ...
下面来谈谈皮尔兹PNOZ s4的复位/启动功能。该安全继电器支持如下几种复位/启动方式: PILZ继电器自动复位/启动(automatic start); PILZ继电器手动复位/启动(manual start); 下降沿监测复位/启动(Mornitored start with falling edge);上升沿检监测复位/启动(Mornitored start with rising edge);带启动测试的复位/启动(...
Manual reset: Unit is active once the input circuit is closed and then the reset circuit is closed. ][Funktionen_berStart_fall_Flanke Monitored reset with falling edge: Unit is active once –the input circuit is closed and then the reset circuit is closed and opened again. –the ...
德国PILZ-PNOZ-S4安全继电器 操作使用: PNOZ s4的前面板有6个LED指示灯,用来指示相应的状态: 当电源供电正常时,Power灯常亮; 当安全通道1闭合时,In1灯常亮; 当安全通道2闭合时,In2灯常亮; 当安全触点闭合,Y32有电平输出时,Out灯常亮; 当S34有复位输入信号时,Reset灯亮起; ...
下面来谈谈PNOZ s4的复位/启动功能。该安全继电器支持如下几种复位/启动方式：自动复位/启动（automatic start）；手动复位/启动（manual start）；下降沿监测复位/启动（Mornitored start with falling edge）；上升沿检监测复位/启动（Mornitored start with rising edge）；带启动测试的复位/启动（Start with start-...
下面来谈谈PNOZ s4的复位/启动功能。该安全继电器支持如下几种复位/启动方式: 自动复位/启动(automatic start); 手动复位/启动(manual start); 下降沿监测复位/启动(Mornitored start with falling edge); 上升沿检监测复位/启动(Mornitored start with rising edge); 带启动测试的复位/启动(Start with start-up ...