The ethernet which using AR8033 PHY works properly at 1gbps. However, when I plug in the cable of the other ethernet line. The newly connected interface becomes link up and works properly. But the other ethernet constantly goes up/down at first, then crashes completely. We cannot turn th...
ret = phy_startup(priv->phydev); if (ret) { printf("Could not initialize PHY %s\n", priv->phydev->dev->name); return ret; } #endif return ret; }static void ethoc_stop_common(struct ethoc *priv) { ethoc_disable_rx_and_tx(priv); ...
show logging ikev2 | resetlog | secure-resetlog | seres | ds-ofdm | traceback | openrpd { all | info | error } | onboard { current | message | startup_time | temperature | voltage } | last | lines Syntax Description ikev2 Displays the ikev2 logs. resetlog Displays ...
on page 22 • startup-capture enable, on page 23 Cisco Remote PHY Device Command Reference 1 backhaul daisy-chain RPD Commands: b through t • tacacs add-key, on page 24 • tacacs add-server, on page 24 • tacacs change-key, on page 25 • tacacs delete-server, on page 25 ...
phy_startup() failed: -110FAILED: -110Config file not found wangyb@zhejiang2022-11-29 19:07 我先排除下问题,我只更新我编译的uboot,是可以启动内核的;这么说,我编译的内核有问题。感觉BSP中的内核有问题。 U-Boot 2017.09 (Nov 28 2022 - 19:30:28 +0800) ...
By size Enterprise Teams Startups By industry Healthcare Financial services Manufacturing By use case CI/CD & Automation DevOps DevSecOps Resources Resources Learning Pathways White papers, Ebooks, Webinars Customer Stories Partners Open Source GitHub Sponsors Fund open source developers ...
Always use the LINK-UP bit in the communication status register to determine the current link status. 4.5.4 TRAINING_FAILED (bit 21.7) A TRAINING_FAILED interrupt is generated if the link fails to start up within maxwait_timer (200 ms; see Figure 2). Since training restarts automatically, ...
If a TRAINING_FAILED interrupt is generated, it indicates that the maxwait_timer has expired and the link was not established in time. The startup procedure is repeated automatically, but the interrupt indicates that there may be an issue establishing a link. When configured as Slave, and ...
show logging ikev2 | resetlog | secure-resetlog | seres | ds-ofdm | traceback | openrpd { all | info | error } | onboard { current | message | startup_time | temperature | voltage } | last | lines Syntax Description ikev2 Displays the ikev2 logs. resetlog Displays the ...
("Failed to add filter_string config line from the Kismet config " "file.", MSGFLAG_FATAL); globalreg->fatal_condition = 1; return; } } // Set up the device timeout device_idle_expiration = globalreg->kismet_config->FetchOptInt("tracker_device_timeout", 0); if (device_idle_...