错误消息“phy_init: failed to load rf calibration data (0x1102), falling back to full”表明在初始化射频(RF)模块时,系统尝试加载射频校准数据但失败了(错误代码为0x1102)。作为备选方案,系统决定回退到完整的初始化过程,这可能会影响设备的性能或功能。 可能导致此错误的原因 校准数据文件损坏或不完整:射频...
When comparing the two kernels, specifically the parts that relates to the error "phy init failed" above, there are major differences. The specific code is in the phy-driver, the file phy-fsl-imx8m-pcie.c, and the function "imx8_pcie_phy_init()". If the r...
I (151) wifi: Init static rx buffer num: 10 I (151) wifi: Init dynamic rx buffer num: 32 I (151) wifi: wifi power manager task: 0x3ffc5010 prio: 21 stack: 2560 W (161) phy_init: failed to load RF calibration data (0x1102), falling back to full calibrationESP...
请教下,捣鼓 wifi softAP 在初始化时出现 phy_init 错误是怎么回事啊 ? W (1407) phy_init: failed to load RF calibration data (0x1102), falling back to full calibration 就是这句错误,电源使用电脑的 usb 口供电 ESP_YJM Posts:300 Joined:Fri Feb 26, 2021 10:30 am ...
[ 2.315939] ti,keystone-serdes 232a000.phy: lane 1 wait rx valid failed: -110 [ 2.323101] ti,keystone-serdes 232a000.phy: serdes lanes enable failed: -110 [ 2.330186] phy phy-232a000.phy.0: phy init failed --> -110 [ 2.335778] netcp-1.0 2620110.netcp: Probe of module(netcp...
PHY初始化(msm_hsphy_init): 在msm_hsphy_init中,首先检查EUD(扩展USB数据)是否已启用。 配置PHY的各种寄存器(如UTMI_CTRL0,HS_PHY_CTRL_COMMON0等)来设置PHY工作模式。 根据需要进行电源配置和调节器设置。 电源管理(msm_hsphy_enable_power):
1dw_mdio_init(dev->name, dev);2priv->bus = miiphy_get_dev_by_name(dev->name); 电源以及 MDIO 总线已初始化完毕,万事俱备,接下来就正式的对 phy 进行操作了,一起来看dw_phy_init函数: 1staticintdw_phy_init(structdw_eth_dev *priv,void*dev)2{3structphy_device *phydev;4intmask =0xffff...
wifi_init_sta(); Code:[Select all][Expand/Collapse] ESP-ROM:esp32c3-api1-20210207 Build:Feb 7 2021 rst:0x15 (USB_UART_CHIP_RESET),boot:0xf (SPI_FAST_FLASH_BOOT) Saved PC:0x420515b8 0x420515b8: cpu_ll_waiti at /home/kying/esp/esp-idf/components/hal/esp32c3/include/hal/cpu_...
int (*config_init)(struct phy_device *phydev); //配置初始化 int (*probe)(struct phy_device *phydev); //探测到 probe方法 int (*suspend)(struct phy_device *phydev); //唤醒 int (*resume)(struct phy_device *phydev); //挂起
(13:38:53.835) eth_phy_802_3: esp_eth_phy_802_3_basic_phy_init(333): power control failed E (13:38:53.844) ip101: ip101_init(175): failed to init PHY [Init PHY okay] W (13:38:56.136) esp_eth: Call read_phy_reg W (13:38:56.138) eth_phy_802_3: bmcr.val:65535 W (...