PETG 3D Printing Filament - High strength, toughness and thermal resistance - The alternative to ABS Material
PETG has a low thermal expansion, so even when printing big objects, and without an enclosure, it rarely lifts from the bed and warps. In addition to that, PETG is ductile. It has a healthy amount of flex which can prevent parts from breaking under pressure. Unlike PLA or ABS, PETG ...
Printing Guidelines for Green PETG: To achieve optimal results when printing with green PETG, consider the following guidelines: Nozzle Temperature: Use a nozzle temperature between 240°C and 260°C. Bed Temperature: Set the bed temperature to 80°C 90°C. Print Speed: Maintain a print speed...
Layer Thickness:65 °C,8 h;Tensile Strength:32 ± 4MPa;Nozzle Temperature:230 - 260 °C;Bed Temperature (with Glue):65 - 75 °C;Printing Speed:< 220 mm/s;Density:1.25 g/cm³;Vicat Softening Temperature:79 °C;Heat Deflection Temperature:74 °C;Melting
Printing and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant) Nozzle Temperature240 - 270 °C Bed Temperature (with Glue)65 - 75 °C Printing Speed< 200 mm/s Physical Properties Density1.25 g/cm³ Vicat Softening Temperature85 °C ...
Printing Temperature: 170-230℃; Forming Technology: FDM; Industry: Crafts; Machine: Fdm 3D Printer; Print Bed Temperature: 55-60ºC; Logo: Customization; Pattern: Customization; Packaging: Customization; Suitable for: Industrial Printer; Type: ABS; Feature:...
Problem: Edges or corners of the print lift from the bed during printing, leading to a warped or curled print. Solution: Increase bed temperature to improve adhesion and minimize warping. Additionally, using a proper bed surface such as PEI, BuildTak, or glass can help with adhesion. Applying...
How do I print this? (Printing help) PETG PETG Last Post RSS jfg (@jfg) Active Member PETG Hey everyone, I'm having trouble with PETG and I'm out of ideas. Tried adjusting retraction, lower temperature, new nozzle, clean and maintain the printer as per the manual. ...
Bed temperature(ºC) 45 - 60°C Fan Speed 100% Printing Speed 40 - 100mm/s Heated Bed Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI Detailed Photos Our Advantages Goofoo is a high-tech enterprise...
Extruder Temperature(ºC) 190 - 230ºCRecommended temperature:215ºC Bed temperature(ºC) 45 - 60°C Fan Speed 100% Printing Speed 40 - 100mm/s Heated Bed Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI Detailed Ph...