M0511A1327 kDa18 kDa1.50In Stock *Older batch information available on request. Literature and Reviews Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors,J. Heo et al., Nat. Photonics 7, 486–491 (2013) doi:10.1038/nphoton.201...
Perovskite solar cells, as an emerging clean energy source, have injected new momentum into the high-quality development of the photovoltaic industry. Recently, Peking University, in collaboration with multiple research groups at home and abroad, proposed a new strategy for improving the performance of...
Fk209 Co(III) TFSI Salt : 11 μl/ml from a 300 mg/ml stock (dissolved in ACN) added and dissolved for 1 minute. This layer should be deposited in an inert environment like a laboratory glove box and the solution should be filtered promptly before deposition with a 0.2 µm filter. ...
Devices were tested on a Newport Oriel Sol3A solar simulator with xenon lamp in the glove box at room temperature. The intensity of the solar simulator was calibrated to 100 mW cm−2AM1.5 G with a KG5 filtered Si reference solar cell that was certified by NREL PV Performance Chara...
During the precursor solution preparation, an inorganic stock solution was created consisting of Cs0.05Pb(I1.75Br0.3), which was then added to MAI and FAI powders to create the final perovskite solution Cs0.05(FA0.83MA0.17)0.95Pb(I2.7Br0.3). To adjust the [MAI + FAI]:Pb ratio, a sm...
The anhydrous lithium iodide is used for doping a perovskite precursor solution stock solution, the anhydrous lithium iodide is combined with the perovskite precursor solution stock solution, and the anhydrous lithium iodide can play a double efficacy. The manufacturing method is simple and easy to ...
A decade ago, efficient, inorganic silicon solar cells were commercialized. Despite its potential, a significant bottleneck remained – price. It’s overall cost was significant in comparison to electricity. This led to an advent of other solar cell technologies based on thin films of CdTe, CIGS...
The perovskite solar cells (PSC) are believed to have great potential in solar cell industries, since the dramatic power conversion efficiency (PCE) improvement in such short time (i.e., from 3.8% in 2009 to 25% up to date). Organolead halide perovskite materials are commonly used in the ...
The patterned FTO substrate (Asahi FTO glass, 12–13 Ω per square) was sequentially cleaned using acetone, isopropanol and deionized water for 15 min by means of ultrasonic cleaning. A 2 M aqueous TiCl4stock solution was first prepared by mixing TiCl4with deionized water at 0 °C...
A Spiro-MeOTAD containing [28.8 μL of Spiro-MeOTAD (Lumtec) (72.3 mg/mL in chlorobenzene), 4-tert-butylpyridine (Sigma-Aldrich, 96% The TSFI stock solution (Sigma-Aldrich, 99.8%) was stirred for 24 h)] was coated on the MAPbI3 layer. A gold electrode was created using thermal ...