Heat release ratePentanol is a new generation bio-fuel that could help relieve the energy crisis and environmental problems. The objective of this study is to reveal the combustion and emission characteristics of pentanol in a single-cylinder direct-injection diesel engine. In the present ...
Description1-Pentanol is a monohydroxy alcohol. It is a colorless liquid with a characteristic odor. Its combustion properties have been studied as it shows promising features to be an alternative to gasoline and diesel fuels. The conversion of 1-pentanol to di-n-pentyl ether (DNPE) in liquid...
This compound can react with oxidizing agents and acids, and it may undergo combustion if exposed to heat or open flames. It is important to handle this chemical with caution and follow proper safety protocols. Applicable Fields 2-Methyl-3-pentanol finds application in several fields due to its...
The results indicated that, compared with single injection (SI), the peak of main injection heat release rate reduced and brake thermal efficiency (BTE) increased when using PI strategies. Adding n-pentanol to biodiesel/diesel (BD) blends resulted in an increase in maximum in-cylinder pressure,...
The results showed that with the increase of the n-pentanol blending ratio, the ignition delay was prolonged, the combustion duration was shortened, and the heat release center was shifted forward. The combustion process at medium and high loads was improved. When the...
Additionally, the 3D engine simulation was performed using KIVA-3V2-CANTERA in conjunction with the mechanism to mimic the in-cylinder pressure and rate of heat release. The results demonstrate that the simplified mechanism is capable of accurately predicting the combustion characteristics of a diesel...
The aim of this paper is to analyze the combustion, performance, and emission characteristics of diesel engines fuelled with diesel-B20-pentanol and diesel-B20-butonal blends without engine modification. Higher viscosity of biodiesel causes poor fuel atomization during the spray process and more ...
Some fundamental combustion properties of isopentanol in an HCCI engine have been characterized in a recent study by Yang and Dec (SAE 2010-01-2164). They found that for typical HCCI operating conditions, isopentanol lacks two-stage ignition properties, yet it has a higher HCCI reactivity than...
The results indicated that the influence of EGR on the NOx emissions between fuels was greater than that of the physicochemical properties of the fuels. For the same EGR rate, the heat release rate (HRR), peak in-cylinder pressure (IP), and brake thermal efficiency (BTE) increased with the...
Heat release ratePentanol is one of the next generation biofuels that could potentially help relieve the energy crisis and environmental problems. The objective of this study is to reveal the effects of pentanol addition to diesel and biodiesel fuels in different ratios on the combustion and ...