peer connect-interface命令用来指定发送BGP报文的源接口,并可指定发起连接时使用的源地址。 undo peer connect-interface命令用来恢复缺省设置。 缺省情况下,BGP使用报文的出接口作为BGP报文的源接口。 命令格式 peer{group-name|ipv4-address}connect-interfaceinterface-typeinterface-number[ipv4-source-address] ...
peer { group-name | ipv4-address } connect-interface interface-type interface-number [ ipv4-source-address ] peer { group-name | ipv6-address } connect-interface interface-type interface-number [ ipv6-source-address ] undo peer { group-name | ipv4-address | ipv6-address } connect-interface...
peer 22.1.1.1 connect-interface LoopBack0 //指定自身的TCP源地址 # ipv4-family unicast undo synchronization peer 22.1.1.1 enable [HW-R2]dis cu conf bgp [V200R003C00] # bgp 100 peer 66.1.1.1 as-number 200 peer 66.1.1.1 connect-interface LoopBack0 # ipv4-family unicast //华为默认显示IPv4...
If the two devices need to establish a BGP peer relationship on two indirectly connected interfaces, check whether thepeer connect-interfacecommand is configured on the two devices. <HUAWEI>display ip routing-table 1.1.22.17Route Flags: R - relay, D - download to fib --...
PEER_SECURITY_INTERFACE Die PEER_SECURITY_INTERFACE-Struktur gibt die Sicherheitsschnittstellen an, die Aufrufe von Peer Graphing-APIs zum Überprüfen, Sichern und Freigeben von Datensätzen verwenden. PEER_VERSION_DATA Die PEER_VERSION_DATA-Struktur enthält die Versionsinformationen zu den Peer...
Unlike other transport binding samples, this sample uses the IChat contract interface for the purpose of illustrating multiparty communication. All instances implement this contract to receive messages and create proxies with the same contract to send messages to the mesh. This is demonstrated by ...
raw_pooled_session->ReadyCandidates());for(PortInterface* port : allocator_sessions_.back()->ReadyPorts()) { OnPortReady(raw_pooled_session, port); }if(allocator_sessions_.back()->CandidatesAllocationDone()) { OnCandidatesAllocationDone(raw_pooled_session); ...
If there are n network interfaces, we will get n+1 clouds—one LinkLocal for every network interface, and one Global cloud. The System.Net.PeerToPeer namespace contains a static class that is called Cloud and can be used to interact with the cloud of a specific peer. This class has two...
[SW_1]interface LoopBack0 [SW_1-LoopBack0] ip address 10.10.0.1 255.255.255.255 [SW_1-LoopBack0]interface LoopBack1 [SW_1-LoopBack1] ip address 172.16.10.1 255.255.255.255 [SW_1-LoopBack1]quit [SW_1]interface GigabitEthernet1/0/2 ...
This is a maintenance release. It fixes a few bugs related to the building block API and web interface. Fixed a bug in the api Modified groupMembers and enrolment in the api Updated guard plugin Fixed a bug when adding 0 member to course using API ...