When the PCM recorder is turned on before the clock has been set, "Set Clock" appears on the display. Then the "Clock" display of the menu appears, and the year section flashes in the display window. 2 Press x STOP to return to the stop mode display. Setting the clock using the ...
Setting DSP to 7.1 kills the centre channel dialog on 2 channel PCM. The only way I can get the dolby upmixer to anchor dialog to the centre channel on 2 channel material is to set DSP to 2 channel or source channels, but as you know I have the "other" intermittent problem when set...
@@ -1221,7 +1222,6 @@ static void copy_slave_setting(snd_pcm_direct_t *dmix, snd_pcm_t *spcm) COPY_SLAVE(buffer_time); COPY_SLAVE(sample_bits); COPY_SLAVE(frame_bits); COPY_SLAVE(monotonic); spcm->info &= ~SND_PCM_INFO_PAUSE; spcm->boundary = recalc_boundary_size(dmix->sh...
I'd use MP3/128k if you want to broadcast the files directly as-is on the internet. The MP3/64kbps setting is for voice note-taking, not for music. The 320kbps MP3 setting is for slightly cleaner MP3 files with double the file size of 128kbps. ...
the audio that accompanies PIP (picture-in-picture) commentaries and the sounds that onscreen buttons make when you click on them. If you set the player to send bitstream, you won't hear this secondary audio, but if you set it to send PCM, the secondary audio is mixed with the main ...
I also get underrun log when setting the audio quality to DYNAMIC_QUALITY. The format of audio can change when setting audio quality to DYNAMIC_QUALITY. alsa->actual_rate is 8000,alsa->actual_channels is 1,format->wFormatTag is 17, format is IMA ADPCM ...
the audio that accompanies PIP (picture-in-picture) commentaries and the sounds that onscreen buttons make when you click on them. If you set the player to send bitstream, you won't hear this secondary audio, but if you set it to send PCM, the secondary audio is mixed with the main ...
HDSP0019M1 HDR HDMI Splitter 1x4 4K 60Hz /UHD/EDID Setting/Scaler Down 18Gbps HLG Dol by Atmos Vision LPCM $23.00 Min. order: 1 piece HDMI Surge Protector ESD Protector HDMI ESD Surge EFT Protector Support 4K 3D $6.80 - $10.00
10.3.2.4 Line Outputs The stereo line level drivers on LOL and LOR pins can drive a wide range of line level resistive impedances in the range of 600Ω to 10kΩ. The output common modes of line level drivers can be configured to equal either the analog input common-mode setting, or ...
8.3.7.1 Programmable Channel Gain and Digital Volume Control The device has an independent programmable channel gain setting for each input channel that can be set to the appropriate value based on the maximum input signal expected in the system and the ADC VREF setting used (see the Reference ...