As the result, when the parity error does not exist, the memory is normal, and therefore, a parity error retrying flag is turned off, and RTI (Return from Interrupt) is obtained. Thus, it can be evaded that a normal device is judged to be abnormal and the error processing is executed...
When the parity checker finds that the parity bit does not match the previously stored parity bit, a parity error is detected, and an error signal or an interrupt is sent to the main CPU. This prevents the error from being propagated so that important system files are not damaged. ...
Alarm flag for back channel error from serializer IE_BCC_CRC_ERR (0xD8) Interrupt on BCC CRC error detect Questions: If there is a CRC error on the BCC, will the 953 stop any I2C transactions from going to its I2C bus? The default for the 954 BC_CRC_GENERATOR_ENA...
22 ethminer Could not login: code:-32601 message:Method not found i 02:07:22 ethminer Disconnected from 127.0.0.1:8008 i 02:07:22 ethminer No connection. Suspend mining ... i 02:07:22 ethminer No more connections to try. Exiting... i 02:07:22 main Got interrupt ... i 02:07:...
A Quick Shot Status field 640 and a Quick Shot Link field 642 are used when a “snapshot” of the file system 250 is taken to allow for online updates and/or verification of the system that does not interrupt client access to the files. During a “snapshot,” copies of some portions...
If this occurs the hardware will prohibit the write operation and will proceed to assert the Frame Error interrupt. When the current frame is being transmitted, the hardware checks if a new frame is ready for transmission by checking a next frame ready bit (NxtFrmRdy) in the transmit status...
The parity bit checker 66 compares the output parity bit (PBout) provided by the parity bit emulator 22 with the checking parity bit (PBch) provided by the parity bit generator 24. If these parity bits do not match, the parity bit checker 66 generates a non-maskable interrupt (NMI) which...