If working from a tub of adhesive, apply dollops of glue in strategic locations on the back of the first panel, then spread it all over, working toward the edges with a notched trowel. If applying adhesive with caulking gun, run beads in a serpentine pattern all over the back of the pa...
A pry bar is helpful in detaching the paneling from the wall. Remove large sections at once when possible in order to minimize the damage to the drywall. After the wood panels have successfully been removed, large globs of glue will more than likely remain stuck to the drywall. A paint sc...
Spread construction glue on the back of each wainscoting board or panel evenly with a trowel, and press the boards into place directly on the wall. Leave a tiny space, about 1/16 of an inch, to allow for the boards to swell in humidity and heat. Press the boards to the wall firmly...
6)Designs: Assorted surface designs availableher material quality, level of gypsum board,environmental protective glue. Suggested places for application : It can be widely used in high fireproof and waterproof requirement environment, such as hotel, hospital, school, house and factory etc. ...
do not require much preparation to attach paneling. Wash the walls with hot, soapy water to remove soil that will reduce the adherence of the glue used to attach paneling to the walls. If drywall or wallboard has been put on the walls, but have not been painted, do not wash the walls...