Not enough catalyst– Mostgelcoatmanufacturers list the amount of catalyst (MEKp) it requires on the side of the can. If you are unable to find a chart, you can use the two charts listed below. We recommend 1.5% – 2.0 % by volume.The Ideal range is 1.8% @ 77°F (approximately 12 ...
viscosity stabilizer; emulsifier; Filler; Flatting agent; Anti-caking agent; Prevents pigment flocculation.; * water encapsulated in fumed silica,; ** Wear respirator until combined with oil when grinding oil paints. PW28 Calcium Silicate Anhydrite; Calcium Silicate; Calcium Metasilicate; C.I. Pigm...
procedure for detecting error and the resulting reformulation of the formula being used, also takes into account variations which occur in the base, the colorant, and in particular batch run variations that will occur in the volume being dispensed as a result of temperature and viscosity ...
The resulting latex polymer has the following properties: pH 9.04, viscosity 74 cP, particle size 148 nm, and solids 46.9%. This yields the additive containing the plurality of latex particles where each latex particle is a latex polymer copolymerized with a polymerizable surfactant and where the...
Spraying Viscosity: Aim for 13~18s (Ford Cup #4 at 20ºC). Maximum Number of Coats: Apply a maximum of 3 coats. Drying Time Temperature Dust Free Tack Free Complete Dry Drying Time 20ºC 1h 2-3 hours 24h Drying Time 60ºC 5 minutes 10 minutes...