这个pin是自定义形状的shape，当扩大extends到很多倍后可以放置这个pin，但是move起来依然不方便，感觉不能...
转载: 原文连接【https://blog.csdn.net/zmq5411/article/details/8212907】 做热风焊盘时老是提示错误: ERROR - Could Not Generate Shape E- (SPMHA1-66): Arc segment is outside of the extents. 热风设置如下 查了 好久才明白 把原点移动drawing的中心位置,... 查看原文 Allegro教程 盘形状) ——Shap...
Can anybody explain what does it means this msg error? When I update the PCB this happens: " Netrev error detected. ERROR(SPMHDB-195): Error processing 'U8': Text line is outside of the extents.." Is it about footprint drawing (text)? or is it about text ...
aIt can be seen from T able 2 that the composition of gasoline changes markedly when the gasoline treated by the modified nano-HZSM-5 catalyst:i-paraffins greatly increase, cycloparaffins and aromatics also increase to different extents, and the ratio of i-paraffins to n-paraffins changes from...
aThis project screws size is fifferent from new drawing and old drawing(sample size is the same as the old one). 这个项目拧紧大小从新的图画是fifferent,并且老图画(样本大小是相同象老一个)。[translate] aDiffusion is fast in ferrite because of its relatively loosely packed bcc structure 扩散是...
When the OutputDC is not a metafile or the Flags variable has bit 2 set (assume OutputDC is NOT a metafile DC irrespective of what Windows reports), the OutputDC will be set to the MM_ANISOTROPIC (abstract) mapping mode, the window and viewport extents will BOTH be set so that the ...
这个pin是自定义形状的shape，当扩大extends到很多倍后可以放置这个pin，但是move起来依然不方便，感觉不能...
转载: 原文连接【https://blog.csdn.net/zmq5411/article/details/8212907】 做热风焊盘时老是提示错误: ERROR - Could Not Generate Shape E- (SPMHA1-66): Arc segment is outside of the extents. 热风设置如下 查了 好久才明白 把原点移动drawing的中心位置,... ...