a电影开始十分钟了 The movie started ten minutes[translate] acar exhaust 汽车尾气[translate] a比如:鼓励一些无用的消费,造成超支等 正在翻译,请等待...[translate] aThe output is rail-to-rail and swings to within 3mV of the 产品是横档到横档的和摇摆到在 3mV 内[translate]...
3V to 12.6V n Output Swings Rail-to-Rail n Common Mode Rejection Ratio: 115dB Typ n Output Current: 30mA n Operating Temperature Range: –40°C to 85°C n LT6230 Shutdown to 10µA Maximum n LT6230/LT6230-10 in a Low Profile (1mm) ThinSOT™ Package n Dual LT6231 in 8-Pin...
Operating in the inverting mode for lowest distortion, the output swings rail-to-rail. The graphs in Figures 38.88– 38.90 display the measured lowpass and distortion characteristics with a 3V power supply. As seen from the graphs, the distortion with a 2.7VP-P output is under 0.03% for ...
HM8551/2/4 Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifiers ■ General Description The HM8551, HM8552 and HM8554 are single, dual and quad amplifiers featuring rail-to-rail input and output swings, which has ultralow offset, drift and bias current. All are ...
The LT6013 and LT6014 operate from any supply voltage from 2.7V to 36V and draw only 145µA of supply current per amplifier on a 5V supply. The output swings to within 40mV of either supply rail, making the amplifiers very useful for low voltage single supply operation. ...
Featuring rail-to-rail input and output swings, low quiescent current (400 μA/ch typical) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hz at 1 kHz) makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current ...
This makes it an ideal alternative to the TLC27x family for applications where rail-to-rail output swings are essential. The TLV27x provides 3-MHz bandwidth from only 550 µA. Like the TLC27x, the TLV27x is fully specified for 5-V and ±5-V supplies. The maximum recommended supply ...
The LT6013 and LT6014 operate from any supply voltage from 2.7V to 36V and draw only 145µA of supply current per amplifier on a 5V supply. The output swings to within 40mV of either supply rail, making the amplifiers very useful for low voltage single supply operation. ...
The output of the operational amplifier swings rail to rail, and the input may swing nearly rail to rail. The operational amplifier combines fast response with low power consumption and low supply voltage.doi:US6590980 B1Farhood MoravejiUSUS6590980 * 2001年9月24日 2003年7月8日 Micrel, ...
The LT6010 works on any power supply voltage from 2.7V to 36V, and draws only 135µA of supply current on a 5V supply. A power saving shutdown feature reduces supply current to 12µA. The output voltage swings to within 40mV of either supply rail, making the amplifier a good choic...