We performed imaging synchronously with stimulation pulses using the high-speed sHAPR system at a rate of 25.6 kHz. To improve the SNR, at least ten AP sequences were averaged for each neuron (Supplementary Movie 7). Within 10 ms, fluorescent signals rise to the near-maximum (Fig. ...
The vertical dashed lines indicate the mean free path and the correlation length, determining the limits of the range where a power-law scaling can be expected. The red dashed line represents a d À 3/2 dependence and serves as a guide to the eye. than one s.d. from the simulated ...
Our ultrathin niobium films are deposited on test glass slides and fiber tapers using DC magnetron sputtering (details can be found in the Methods Section). Continuous and smooth niobium films with an rms roughness of only 1.8 nm at a total film thickness of 12.5 nm have been obtained...
During the past few years, metasurfaces have been used to demonstrate optical elements and systems with capabilities that surpass those of conventional diffractive optics. Here, we review some of these recent developments, with a focus on dielectric stru
We performed imaging synchronously with stimulation pulses using the high-speed sHAPR system at a rate of 25.6 kHz. To improve the SNR, at least ten AP sequences were averaged for each neuron (Supplementary Movie 7). Within 10 ms, fluorescent signals rise to the near-maximum (Fig. ...
The resolution of the OI SST was sharpened from 0.25˝ to 0.05˝ to correspond with the MTSAT JAMI data. To evaluate of the MTSAT COT/DER products, we used the following data: (1) COT and DER from MYD06/MOD06, which are derived from the MODIS visible and near-infrared channel...
Any eye not meeting the 20/25 entry criterion was refracted with chart R and any new/different best correction identified was used throughout the remainder of the study. ETDRS acuity was utilized in our study exclusively as an entry criterion, and no test-retest variability measurement was ...