kmod-usb-storage USB⼤容量存储设备的内核⽀持 kmod-usb-storage-extras可选 Kernel support for some more drivers, such as for SmartMedia card readers block-mount optional & recommended Scripts used to mount and check block devices (filesystems and swap) required to configure with /etc/config/...
Note that partitions are usually auto detected, so this should work as well using default settings: mount /dev/sda2 /mnt/share Another example is how to use an external usb stick with a FAT32 partition (but we'll keep ext4 support also). See alsoStorage. ...
UHCI USB控制器:kmod-usb-uhci USB2.0驱动:kmod-usb2 USB3.0驱动:kmod-usb3 USB存储设备驱动:kmod-usb-storage 额外USB存储设备驱动:kmod-usb-storage-extra USB接口连接SCSI驱动:kmod-usb-storage-uas USB设备信息查看工具:usbutils 挂载卸载工具:mount-utils NTFS读写工具:ntfs-3g VFAT文件系统驱动:kmod-fs-vfat...
UHCI USB控制器:kmod-usb-uhci USB2.0驱动:kmod-usb2 USB3.0驱动:kmod-usb3 USB存储设备驱动:kmod-usb-storage 额外USB存储设备驱动:kmod-usb-storage-extra USB接口连接SCSI驱动: kmod-usb-storage-uas USB设备信息查看工具:usbutils 挂载卸载工具:mount-utils NTFS读写工具:ntfs-3g VFAT文件系统驱动:kmod-fs-vf...
3: Format USB Storage Format the device by running: mkfs.ext4 /dev/sda1 Make sure you replace ‘sda1’ with the name of the device as identified in the previous step 4: Updatefstabwith New Storage Device fstabis the Linux configuration file which configures the storage available on the sys...
Note that partitions are usually auto detected, so this should work as well using default settings: mount /dev/sda2 /mnt/share Another example is how to use an external usb stick with a FAT32 partition (but we'll keep ext4 support also). See alsoStorage. ...
TP-LINK TL-WR720N v4# 由于make image会下载需要的交叉编译环境,可以设置终端代理(根据自己的情况填入 host 和 port)$exporthttp_proxy=http://[host]:[port]$exporthttps_proxy=http://[host]:[port]# 使用以下命令编译$ make imagePROFILE="tl-wr720n-v4"PACKAGES="kmod-usb-storage kmod-fs-ext4 e2fsp...
但是使用大容量SD卡的用户,有很大一部分存储空间无法被利用,这是一种极大的浪费,好在我们可以通过新建分区的方法使用这一部分空间。由于squashfs和ext4两种文件系统的特性,在squashfs扩容时无法扩大安装程序的空间,而ext4可以,接下来我们以两种不同的文件系统为例,分别讲解他们的扩容过程。
Tip: Functions such as install/update are provided by luci-app-amlogic to provide visual operation support. Also supports command operations.Use OpenWrt in TF/SD/USBLog in to the default IP: 192.168.1.1 → Login in to openwrt→ system menu→ TTYD terminal→ input commandopenwrt-tf...
kmod-usb-storage kmod-usb-storage-extras mount-utils ntfs-3g lsblk block设备操作 插入USB设备后,先看下block device的情况,这里有一块新的硬盘HDD_WD,文件系统类型为ntfs: root@OpenWrt:/# block info /dev/ubiblock0_1: UUID="9dd39244-6da44be1-375f0c26-39420196" VERSION="4.0" MOUNT="/rom"...