├── 70_initramfs_test--preinit_main钩子:用于检测是否使用了 initramfs 并执行相关操作。├── 80_mount_root--preinit_main钩子:用于挂载根文件系统,并在系统升级时恢复配置文件。如果INITRAMFS环境变量设置为 "1",则不会添加此钩子。├── 81_urandom_seed--用于将随机种子文件的内容写入/dev/urandom,以...
(call Device/UbiFit) + DEVICE_VENDOR := TP-Link + DEVICE_MODEL := M9 Plus + DEVICE_VARIANT := v2 + SOC := qcom-ipq4019 + DEVICE_DTS_CONFIG := config@ap.dk07.1-c1 + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + IMAGE/factory.ubi := append-ubi + PAGESIZE := 2048 + BLOCKSIZE ...
Place OpenWrt initramfs-recovery.itb image (with original name) on the tftp server (IP: 192.168.1.254). 2. Press "reset" button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery. BL2 and FIP recovery --- Use mtk_uartboot and UAR...
openwrt-ipq40xx-generic-tplink_deco-m9plus-v2-initramfs-recovery.itbopenwrt-ipq40xx-generic-tplink_deco-m9plus-v2.manifestopenwrt-ipq40xx-generic-tplink_deco-m9plus-v2-squashfs-factory.ubiopenwrt-ipq40xx-generic-tplink_deco-m9plus-v2-squashfs-sysupgrade.bin 刷机 参考另一篇文章: 这里只记录...
KERNEL_INITRAMFS_SUFFIX := -recovery.itb IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef # TARGET_DEVICES += xiaomi_redmi-router-ax6s ImmortalWrt项目紧跟openwrt主线,合并后也删除了ax6s设备,并给出了原因...
Now I am stuck in the MediaTek U-Boot System Recovery Mode (LAN-Port @ 192.168.1.1). I tried to reflash the bin but it loops to Upgrade failed! @oe1rfchow did you manged to flash the initial firmware? edit I got stuck in the bootloader because I used the wrong image: initramfs-ker...
更新启动参数:update-initramfs -u -k all 重启reboot Sec2:创建OpenWrt虚拟机 根据一切从简的原则创建虚拟机,没提到的就是默认。 General 需要填一个名字,并记住VM ID(后面要用到) OS Do not use any media(不使用任何媒体) Guest OS:Linux / 6.x-2.6 Kernel ...
github.com/syvaidya/lin(fork,增加了 vendor, product, odm and recovery 分区的支持) 解upgrade 分区(ubifs) 直接挂载提取文件这条路不好走,要借助一些项目。 @ IoT(八)ubi文件系统挂载&解包 UBI 文件系统不能直接挂载,而是要用 nandsim 模拟出一个 mtd 设备 ... 上述通过挂载方式读取ubi文件的过程较为繁...
The Dockstar does not have a UART booting recovery. So it is best to flash u-boot inside Debian. Because if the flashing went wrong, there might be still some way for us to fix it. When you flash in serial console, and it is bad then it is bricked! and It is actually easier to...
通过tftp 载入 recovery 镜像 在uboot 写入完成后,请直接断电,在接上电源启动,然后观察tftp服务器,如果files下面的xxx-recovery.itb文件名刚好为openwrt-mediatek-filogic-tplink_tl-xdr6088-initramfs-recovery.itb那么你会看到文件传输的动作,如下图: