1.删除之前配置的pppoe接口。 2.编辑wan接口,在基本设置里IPv4网关(IPv4 gateway)输入电信光猫的网关地址192.168.1.1,在高级设置里使用指定DNS服务器(Use custom DNS servers)输入192.168.1.1,然后保存。 3.增加wan6接口(用于http://mynas.xxx.com),协议选DHCPv6 Client,接口选eth0。创建接口后,在通用设置中勾选...
b.配置 WAN 口,让路由连上 Internet,参考:http://wiki.openwrt.org/doc/howto/internet.connection 。 比如要配置 PPPoE: uci set network.wan.proto=pppoe uci set network.wan.username='yougotthisfromyour@isp.su' uci set network.wan.password='yourpassword' uci commit network ifup wan 1. 2. 3....
要使用PPP,必须安装ppp软件包。 "pppoe" (以太网的PPP)协议 要使用PPPoE,必须安装ppp-mod-pppoe软件包. "pppoa" (ATM上的PPP)协议 要使用PPPoA,必须安装ppp-mod-pppoa "3g" (PPP over EV-DO, CDMA, UMTS or GRPS)协议 要使用3G,必须安装comgt "pptp" (Point-to-Point Tunneling Protocol)协议 要使用PP...
Protocol: PPPoE RX: 0 B (0 Pkts.) TX: 0 B (0 Pkts.) Error: Connection attempt failed 在宿主机给容器断开第二个lan口的macvlan,重启宿主机,wan口拨号恢复正常。 另外,请问宿主机建立bridge-lan,是分割wan口和lan口,还是别的理解?谢谢。 Copy link Owner Author lisaac commented Mar 24, 2020 ...
Describe the bug On my Raspberry PI 4, I get a kernel exception that causes a reboot about two seconds after the internet connection was established using PPPoE. Provider is Deutsche Telekom. This error occurs since kernel 6.1.75 bump in...
Zidoo X9S is a massive improvements compared to most other Android TV boxes on the market with both HDMI audio pass-through working well, and DTS and Dolby audio licenses (also confirmed with MX Player app). But what happened in the forth column, with my first attempt...
I cannot install the buildbots as there are no necessary packages available, and some essential packages for establishing the PPPOE connection are missing. I would still need to use the OpenWRT firmware sector and manually write package by package, which doesn't seem like the correct approach....
I also installed aria2 and ariang web GUI and noticed huge difference in GUI responsivness (feels native to my pc), on officlal openwrt ariang would lose connection to aria2 server while downloading eventhough it is still running as reported by htop and regains connection after 1-2 minutes...
The main pppoe connection reconnects every 7 days. None of the l2tp.sh files here (aed5a4f, 38cf142, e9e2400) managed to reconnect the l2tp connection after pppoe reconnection. Although, sometimes l2tp did reconnect automatically, if it was dropped for unknown reason. But never after pppoe ...
The new packet steering script on Gl.Inet MT6000 slow down the wan speed on ppoe connection to 1.3gb/s Old packet steering script no issue OpenWrt version r25967-ff814d7c76 OpenWrt release SNAPSHOT OpenWrt target/subtarget mediatek/filogic ...