N100小主机，四个i226-v的intel网卡。root@N100:~# uname -r 6.2.16-3-pve 安装的是pve 8.0....
1. 硬件连接 将已安装飞牛OS的小主机接入家庭局域网,确保设备正常联网,我这里使用了一台N100处理器的小主机安装了飞牛OS系统做为演示。 2. 开启SSH连接 接着进入飞牛OS后台,在系统设置中找到SSH,把它打开,它默认端口是22,保持即可。 3. 配置FinalShell 访问FinalShell官网,根据当前电脑系统下载对应的客户端,安装后...
a fanless Intel N100 model and an actively-cooled Core i3-N305 model. Since we’ve already gone through the specifications in the first article, I’ll start the iKOOLCORE R2 Max review with an unboxing, a teardown, and a first boot. In the second part of the review, I’ll use Prox...
a fanless model and an actively-cooled model. I was told the fanless one was based on Intel N100 SoC, and the actively-cooled one was powered by an Intel Core i3-N305 CPU, but I ended up with two Intel N100 devices. The fanless model will be an OpenWrt 23.05 (QWRT) server, and...
The device has built-in Intel N100 processor, Intel UHD graphics card and HDMI/DP dual display interface, making it easy to install and manage. The device supports DDR5 memory slots with a maximum memory capacity of 16GB. In addition, it also has 1*NVMe SSD slot, providing ample storage ...
I then set the Network on the WiFi SSID to IoT. So IoT is a bridge of VLAN 666 and the United Federation of Planets SSID. ASUS B650E-F GAMING WIFI + R7 7800X3D + 2x Corsair Vengeance 32GB DDR5-6000 CL30-36-36-76 + ASUS RTX 4090 TUF Gaming OC Router: Intel N100 (pfSense...
root@OpenWrt:~#ubus call system board{"kernel":"6.6.35","hostname":"OpenWrt","system":"Intel(R) N100","model":"AZW EQ","board_name":"azw-eq","rootfs_type":"ext4","release": {"distribution":"OpenWrt","version":"SNAPSHOT","revision":"r26816-55bda9863d","target":"x86/64"...
plus i forgot to mention it running in a chroot enviroment on openwrt. and other methods work such as cpu and gna . I have not tried GPU as it has a gen 8 intel video processor (N3160). I have an gen 9 N100 next week. the project is an all in one low power (~5...
ikuai设置 设置ipv6 记得把dns设置上,要不然后面测试不通过 Openwrt设置 接口里新建一个LAN6,选择DHCPV6 选择DHCPV6 物理设置里 选择自定义输入“@lan" 重要,重要,重要 物理设置里 选择自定义输入“@lan" 重要,重要,重要 设置防火墙 高级设置如图 高级设置按我图片中的勾选 ...
ip link set eth0 promisc on 创建网络:你的网络是多少段X就填多少,其他的数字不要改! docker network create -d macvlan --subnet=192.168.X.0/24 --gateway=192.168.X.1 -o parent=eth0 openwrt 举个例子,我的onecloud的ip是192.168.68.220,所以上面代码的两个X换成68即可 ...