make[3] -C package/network/utils/resolveip compile make[3] -C package/libs/libsepol compile make[3] -C package/libs/musl-fts compile make[3] -C package/utils/e2fsprogs host-compile make[3] -C package/libs/libubox host-compile make[3] -C package/libs/libnl-tiny compile make[3] -C p...
然后就是通过make编译,编译大概会分为两个阶段,一是先通过本机的gcc编译出来一个交叉编译工具链;然后再通过交叉编译的工具链编译目标处理器的openwrt系统固件 不过我们在make之前,还得把编译过程中的资源下载路径优化一下,加速编译过程。 (主要是把中科大的镜像地址放到最前面) 然后make [-j10] V=sc进行编译(加...
勾选配置信息 make menuconfig 勾选系统基本信息并配置所需的功能 这一步只需在以下的图形界面下按空格或回车勾选相应选项即可完成配置。 Make menuconfig 指令后的图形化配置信息勾选界面 以本次编译的系统为例,首先选择树莓派 4B对应的CPU型号等信息: 匹配适合树莓派4B的架构 之后,由于勾选对应的CPU型号后,配置...
可以选择 V=sc 打印编译 log: $ make V=sc -j24 编译成功之后会在 bin/target/loongson/ls2k500下生成openwrt-loongson-ls2k500-loongson_gd_ls2k500_mini-ubifs-root.ubi文件,将其改名为rootfs-ubifs-ze.img后烧录到板卡即可。 直接复制保存config $ cp .config .configs/xxx_config 注意: ./scripts/...
报错信息:make -s -C scripts/config mconf: build failed. Please re-run make with -j1 V=s or V=sc for a higher verbosity level to see what's going on /home/project/openwrt/include/toplevel.mk:105: recipe for target 'scripts/config/mconf' failed 解决办法: sudo apt-get install pkg-...
#6. 编译 sudo make package/srs-server/compile V=s sudo make package/srs-router/compile V=s 关键问题解决 srs-router编译错误 编译srs-router错误, 重新make menuconfig, 暂时不编译srs-route, 仅编译srs-server 。#7. 编译srs-router错误 /home/ney/fdWRT/friendlywrt22-rk3568/test/staging_dir/...
openwrt编译mt7620n时make V=99遇到fatal: unable to access 'https://git.kernel.org/pub/sc...': gnutls_handshake() failed: Handshake failed,或者是connect refused,单独clone也不行,不过把URL的https改成http就可以单独clone,但是这样做之后重新编译的还是会clone原来那个URL,然后又报一样的错误 ...
一直编译不成功,大佬..make -r world: build failed. Please re-run make with -j1 V=s or V=sc for a higher verbosity level to
make package/hiOpenWRT/compile V=s 4)编译结果 在bin/x86_64/packages/base下可以找到hiOpenWRT_1_x86_64.ipk。 4)模块安装 opkg install xyz.ipk 参考文献: http://blog.chinaunix.net/uid-29418452-id-4071751.html 编译OpenWrt模块–进阶篇
make -j1 1. 当然你要是不放心之前下载的相关源以及多核编译的依赖,你可以执行下面的代码,在编译前重新下载一次,然后自动开始编译 make -j $(nproc) download world 1. 你可能在别的教程里面见过在命令后面还有V=sc或者V=s,这是打开日志显示,在你编译出错排错时,会在终端进行显示错误信息,对于排除错误很有用...