软件配置:某些软件或配置可能故意将文件系统设置为只读,特别是在需要保护系统文件的场景中。 OpenWrt编译配置:在编译OpenWrt固件时,如果没有包含支持特定文件系统的模块(如ext4、vfat等),则挂载相应文件系统的存储设备时可能会出现只读问题。 3. 给出解决OpenWrt只读文件系统问题的方法 检查硬件:首先检查存储设备(如SD...
mkdir: can't create directory 'he': Read-only file system wrg8699 ---x--x 9 /dev/sda1 on /home/admin/usb type ext4 (ro,relatime,data=ordered) 其中(ro,...)就是只读挂载。你的openwart的文件系统可能是只读文件系统,即使挂载其外部存储设备也是按只读的文件系统挂载。不防试试,在uboot下进...
-o, –options comma-separated list of mount options -O, –test-opts limit the set of filesystems (use with -a) -p, –pass-fd read the passphrase from file descriptor -r, –read-only mount the filesystem read-only (same as -o ro) -t, –types limit the set of filesystem types...
[ 2.824545] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.[ 2.833446] Freeing unused kernel memory: 244K (84733000 - 84770000)[ 3.006884] init: Console is alive [ 3.011436] init: - watchdog - [ 3.329383] init: - preinit - [ 6.570976] mount_root: mounting /...
摘要:引用博客:https://clockworkbird9.wordpress.com/2016/09/ [ 2.824545] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 2.833446] Freeing unuse 阅读全文 » 02 make和目录结构 发表于 2022-01-03 15:26阅读:187评论:0推荐:0 摘要:1 make 1.1 整体编译 make V=s make -...
= 4096k + IMAGE_SIZE := 31232k + KERNEL_IN_UBI := 1 + DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \ + kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs +endef +TARGET_DEVICES += tplink_deco-m9plus-v2 define Device/unielec_u4019-32m $(call Device/FitImage) ...
without journal. Opts: (null)[ 2.021634] VFS: Mounted root (ext4 filesystem) readonly on ...
filesystem with ordered data mode. Opts: (null)VFS: Mounted root (ext4 filesystem) readonly on...
2.下一步记得把TF卡的空闲磁盘分区一下,并格式化为ext4,然后在挂载,注意这里必须提前取消图中“自动挂载未配置的磁盘”的勾选(不然挂载会报错),以下是代码如需扩容overlay自行学习。 ps:最快速扩容参考https://mlapp.cn/1011.html扩容全盘分区画重点ubuntu中使用Gparted调整记得界面右键卸载rootfs分区后方可调整成功!
首先要成功挂载USB盘符,根据不同的文件系统,可选安装不同的驱动,比如下面只安装ext4和FAT32驱动。若要读写NTFS分区,参考Openwrt Wiki: Writeable NTFS,即安装ntfs-3g软件包 opkg update opkg install \ kmod-usb-storage \ kmod-fs-ext4 \ kmod-fs-vfat \ ...