1.2 引出JTAG信号 最小系统的工程已经引出了CPU JTAG的相关信号,如果要用到自己FPGA平台的外设还需要修改对应的约束文件,用来配合自己的FPGA环境。 与JTAG相关的约束,如果和我们的环境不同,需要按照自己的环境进行修改。 set_property PACKAGE_PIN F54 [get_ports JTAG_TCK] set_property PACKAGE_PIN A54 [get_port...
本文用作个人技术备忘录,如有错误欢迎指出。 同步发布于 OpenOCD简明指南 | The Vault of woshiren (nanjo712.github.io)OpenOCD(Open On Chip Debugger)是一个开源的嵌入式调试软件,支持多种SoC、FPGA、CPLD…
固件烧录 JTAG 允许器件编程器硬件将数据传输到内部非易失性器件存储器(例如 CPLD,闪存),目前,所有 FPGA 和 CPLD 包括我们常用的 SoC、MCU 都使用 JTAG 来提供对其编程功能的访问。 注意,固件烧录可以根据存储介质分为 RAM 烧录和 ROM 烧录。其中,RAM 烧录可以直接写,而 ROM 烧录则需要特定的烧...
JTAG (Joint Test Action Group,联合测试行动小组)是一种国际标准测试协议(IEEE1149.1兼容),主要用于芯片内部测试。现在多数的高级器件都支持JTAG协议,如ARM、DSP、FPGA器件等。标准的JTAG接口是4线:TMS、TCK、TDI、TDO,分别为模式选择、时钟、数据输入和数据输出线。相关JTAG引脚的定义为: TMS:测试模式选择,TMS用来...
git config --global user.name userName git config --global user.email userEmail 分支1 标签0 JamesFixed compilation on GCC 8.2.0c705bfc6年前 8358 次提交 提交 jimtcl@51f65c6 jimtcl: update to 0.76 release version 10年前 contrib Merge branch 'master' into from_upstream ...
OpenOCD provides on-chip programming and debugging support with a layered architecture of JTAG interface and TAP support including: - (X)SVF playback to facilitate automated boundary scan and FPGA/CPLD programming; - debug target support (e.g. ARM, MIPS): single-stepping, breakpoints/watchpoints...
Hardware:The debugger PC and the FPGA board are connected via JTAG (actually using an OnBoard USB Blaster, so a USB cable). The PC can be either Windows or Linux. PC Software:OpenOCD is kept running, with the gdb server accessing the USB Blaster being active. The gdb debugger for Arm...
target :关于芯片。“target ”目录代表JTAG TAP。 在芯片上 OpenOCD应该控制哪个,而不是一个板子。两种常见的目标类型 是ARM芯片和FPGA或CPLD芯片。 当一个芯片有多个TAP(也许它同时具有ARM和DSP内核)时, 目标配置文件定义了所有这些。 more :浏览其他可能有用的库文件。 例如,有各种通用和特定于 CPU 的实用程...
通过cygwin编译,需要依赖很多库文件,因此切换到MinGW平台。 ./bootstrap mkdir /openocd_win ./configure PKG_CONFIG_PATH=/usr/lib/pkgconfig LDFLAGS="-Wl,-s" --enable-ftdi --enable-dummy --prefix=/openocd_win make -j4 make install 将已编译好openocd运行,可看到其版本信息: ...
Hardware: The debugger PC and the FPGA board are connected via JTAG (actually using an OnBoard USB Blaster, so a USB cable). The PC can be either Windows or Linux. PC Software: OpenOCD is kept running, with the gdb server accessing the USB Blaster being active. The gdb debugger for ...