GTP USB PIC PROGRAMMER (Open Source): This work includes, GTP USB (not plus or lite) . The schematic, photos and PCB have been developed by PICMASTERS based on some valuable works done before. This programmer supports pic10F, 12F, 16C, 16F, 18F,24C
I want the software, fpga designs and the firmware to be OPEN SOURCE, this was the idea behind it, as you cannot by a good true universal programmer for less than around £500 i thought it would be a good project to undertake, with the added benefit of a smart card programmer and I...
NAND read of chip ID support Open KiCad PCB & Schematic Open source code Write speed: 512KBytes...
NANDO is open source NAND programmer based on STM32 processor. It supports parallel NAND and SPI flash programming. PCB boards: Application: Features USB interface PC client software for Linux & Windows. TSOP-48 socket adapter for NAND chip (compatible with TL866 adapter) ...
Inside the FPGA chip have been implemented a number of digital modules including three pulse programmers, the digital part of DDS, a digital quadrature demodulator, dual digital low-pass filters, and a PC interface. These FPGA core modules are written in VHDL, and their source codes are ...
Once we realized that Open Source was not just a feature, but the technical enabler of eCos, and once we proved to ourselves that with this feature, we had a 10x performance advantage over our competition (10x space savings over object-level configurability and 10x-100x programmer efficiency ...
stlink is an open source toolset to program and debug STM32 devices and boards manufactured by STMicroelectronics. It supports several so called STLINK programmer boards (and clones thereof) which use a microcontroller chip to translate commands from USB to JTAG/SWD. There are four generations av...
OpenOCD, short for Open On-Chip Debugger, is an "Open Source software aimed at providing debugging, in-system programming, and boundary-scan for embedded devices."2It incorporates features of a gdb server and a telnet server, supporting a variety of debug probes, thereby enabling debugging on...
Config Command: adapter gpio [ tdo | tdi | tms | tck | trst | swdio | swdio_dir | swclk | srst | led [ gpio_number | -chip chip_number | -active-high | -active-low | -push-pull | -open-drain | -open-source | -pull-none | -pull-up | -pull-down | -init-inactive | -...
CPUs also tend to provide significantly more on-chip cache than GPUs. In this example, the CPU device contains 512 kB L2 cache/core plus a 6 MB L3 cache that is shared among all cores, for a total of 8 MB of cache. In contrast, the GPU device contains only 128 kB cache shared by...