If it wasn’t for Opal Kelly, our company would not exist. It would have been too complicated to create our solutions. Opal Kelly gave us an easy way to get started, saving us a lot of time and work and enabling us to focus our expertise on our unique products. ...
This researchpaper focuses on estimating the real-time voltage stability through the use of linear, nonlinear, anddynamic load models in presence of a DFIG based wind-farm in WSCC three-machine nine-bus powernetwork using PMU data. This study is carried out using MATLAB-Simulink software. X ...
a kurtosis measure is proposed as a quick measure to assess the estimation signal’s characteristics and evaluate the presence and prominence of significant modes within the signal. The effectiveness of the developed approach is validated via MATLAB/SIMULINK simulations. Four case studies were conducted...
In one case yttria-stabilised zirconia single crystal substrates with a similar lattice spacing to that of the pyrochlore phase were used, and films could be produced that were aligned with substrates that were cut along various different crystal faces [38]. Thicker films were heavily textured and...
In such a case, the simulator waits until the clock ticks to the next time- step. However, if simulator operations are not all achieved within the required fixed time-step, the real-time simulation is considered erroneous. This is commonly known as an “overrun”. Based on t 12、hese ...
Across multiple studies and for over two decades, patients have noted this as important for the hospital setting, but families have not mentioned this at all - the only domain of importance where this is the case. Inpatients want to be supported to live as well as they can, within the ...
In this case, ΦΛ is in the range from 35% to 47%. It means that less than a half of the total luminous flux is sent in the direction of the upper half space. Unfortunately, in practical solutions, where economic considerations play an important role, the luminaire is typically ...