<HUAWEI>system-view[~HUAWEI]observe-port 1 interface10ge1/17/2vlan 2 # 配置接口10GE1/17/1为三层远程镜像观察端口,目的IP为1.1.1.1,源IP为2.2.2.2。 <HUAWEI>system-view[~HUAWEI]observe-port 2 interface10ge1/17/1destination-ip 1.1.1.1 source-ip 2.2.2.2 ...
字符串形式,区分大小写,不支持空格,长度范围是1～31。不能以“_public_”作为VPN实例名称。当输入的字符串两端使用双引号时,可在字符串中输入空格。 ipv4 指定IPv4。 - destination-ip dest-ip-address 指定镜像报文的目的IP地址。 点分十进制形式。 source-ip source-ip-address 指定镜像报文的源IP地址。 点...
整数形式,取值范围是1～8。 ipv4 指定IPv4。 - destination-ipdest-ip-address 指定镜像报文的目的IP地址。 点分十进制形式。 source-ipsource-ip-address 指定镜像报文的源IP地址。 点分十进制形式。 dscpdscp-value 指定镜像报文的优先级。 整数形式,取值范围是0～63,默认为0。
整数形式,取值范围是1～8。 ipv4 指定IPv4。 - destination-ip dest-ip-address 指定镜像报文的目的IP地址。 点分十进制形式。 source-ip source-ip-address 指定镜像报文的源IP地址。 点分十进制形式。 dscp dscp-value 指定镜像报文的优先级。 整数形式,取值范围是0～63,默认为0。 erspan-id erspan-id 指...
The value is an integer that ranges from 1 to 8. ipv4 Specifies IPv4. - destination-ip dest-ip-address Specifies destination IP address of mirrored packets. The value is in dotted decimal notation. source-ip source-ip-address Specifies the source IP address of mirrored packets. The value ...
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. The VPN instance name cannot be _public_. If the character string is quoted by double quotation marks, the character string can contain spaces. ipv4 Indicates IPv4. - destination-ip dest-ip-address Specifies...
The value is an integer that ranges from 1 to 8. ipv4 Specifies IPv4. - destination-ip dest-ip-address Specifies destination IP address of mirrored packets. The value is in dotted decimal notation. source-ip source-ip-address Specifies the source IP address of mirrored packets. The value is...
# Configure 10GE1/17/1 as the observing port for Layer 3 remote mirroring, and set the destination IP address to 1.1.1.1 and the source IP address to 2.2.2.2. <HUAWEI> system-view [~HUAWEI] observe-port 2 interface 10ge 1/17/1 destination-ip 1.1.1.1 source-ip 2.2.2.2 Related...
# Configure 10GE1/17/1 as the observing port for Layer 3 remote mirroring, and set the destination IP address to 1.1.1.1 and the source IP address to 2.2.2.2. <HUAWEI> system-view [~HUAWEI] observe-port 2 interface 10ge 1/17/1 destination-ip 1.1.1.1 source-ip 2.2.2.2 Related Topic...
Destination IP address of GRE packets. You can run the observe-port (remote observing port) command to set this parameter. Src-Mac Source MAC address of GRE packets. Dst-Mac Destination MAC address of GRE packets. Related Topics observe-port (local observing port) observe-port (remote observin...