Product NameNYLON 6/12 CAS26098-55-5 CBNumberCB0300744 MF(C12H22O4.C6H16N2)x MW346.51 MDL NumberMFCD00134001 MOL File26098-55-5.molChemical Properties Melting point 218 °C(lit.) Density 1.3 g/mL at 25 °C(lit.) solubility strong proton donor solvents, acetic acid and phenols: ...
NYLON 6/12 Properties Melting point218 °C(lit.) Density1.3 g/mL at 25 °C(lit.) solubilitystrong proton donor solvents, acetic acid and phenols: soluble formpellets Indirect Additives used in Food Contact SubstancesNYLON 612 EWG's Food Scores1 ...
MELTING TEMPERATURE DEPRESSIONX PARAMETERPhase behavior of blends of poly(ethylene-co-vinyl alcohol) containing 59 mol% of ethylene units (EVOH59) with nylon 6-12 (PA6-12) containing 60 mol% of nylon 6 units was investigated by cloud point measurements and dynamic mechanical measurements. From ...
Polyamide Nylon PA6/66/12 material made in China in our factory. Nylon 6T (PA6T) Resin Product Details Nylon 6T Its outstanding features are high temperature resistance (melting point of 370°C, glass transition temperature of 180°C, long-term use at 200°C), high strength, dimensional st...
Melting Point TempASTM D3418°C260 ASTM D3418°F500 Max Continuous Operating Temp°C98 °F210 Minimum Operating Temp°C-30 °F-22 Thermal ConductivityASTM C117BTU-in/ft²-hr-°F1.7 ASTM C117x 10^4 cal/cm-sec-°C5.9 Flammability RatingUL94NAHB ...
Melting Point218 °C424 °FDAM; ASTM D3418 Deflection Temperature at 0.46 MPa (66 psi)135 °C275 °FDAM; ISO 75-1/-2 Deflection Temperature at 1.8 MPa (264 psi)55.0 °C131 °FDAM; ASTM D648 62.0 °C144 °FDAM; ISO 75-1/-2 ...
Melting Point215 °C419 °FPeak Temperature; ISO 3146, ISO 11357 Deflection Temperature at 0.46 MPa (66 psi)170 °C338 °FWhen conditioned at 180°C for 1 hour; ISO 75 Deflection Temperature at 1.8 MPa (264 psi)55.0 °C131 °FISO 75 ...
The relatively low melting point of nylon 6 means that it may not be used at elevated temperatures. At temperatures below its melting point, on the other hand, nylon 6 has a somewhat better resistance to prolonged heating. This can be an important factor in some applications, e.g., tires...
Polyamide 6 (Nylon 6) Polyamide 6 (PA 6) is also known as Nylon 6 or polycaprolactam. It is one of the most extensively used polyamides globally. It is synthesized by ring-opening polymerization of caprolactam. Melting point ofpolyamide 6is 223°C. ...
Nylons 4, 8, 11 and 12 are known; nylons 11 and 12 are produced commercially for plastics applications. Their lower melting point, lower moisture absorption and lower modulus of elasticity make them useful in a different set of applications to those of nylon 6. Nylon 11 is prepared from 11...