4. Configure the following NTP settings:•Interval: Time interval between the two synchronizing actions with NTP server. The unit is minute.•NTP Server: IP address of NTP server.•NTP Port: Port of NTP server. Default as 123.5. Click the Apply button to save and exit the interface.
• NTP Server: IP address of NTP server. • NTP Port: Port of NTP server. Default as 123. 5. Click the Apply button to save and exit the interface. 6. Or configure it via web browser in the interface below. Note: The time synchronization interval can be set from1 to 10080min,...
In the server address field i've put in the IP of the NAS (whch is hosting Survilence Station) Noticed that the cameras dont have the correct default gateway so corrected that to reflect the router IP address yet still fails NTP. Yet it does work when you point them to uk.ntp.pool ...
That is great to have the NTP server built into SecuritySpy. I installed it, and tested it using the terminal. Shows that it is working on my Mac Mini and I have a manually assigned IP address. The HikVision cameras are configured to run on NTP with the same server address. When ...