Stratum 1: Primary NTP servers Stratum 2: 依赖 NTP 服务器Stratum 2: Dependent NTP servers 通过与多个参考服务器交互提供容错能力Fault tolerance through interaction with multiple reference servers 架构Architecture 与多个参考服务器(Peers)交换时间戳Exchange of timestamps with multiple reference servers (...
NTP(网络时间协议)Network Time Protocol 网络时间协议(英语:Network Time Protocol,缩写:NTP)是在数据网络潜伏时间可变的计算机系统之间通过分组交换进行时钟同步的一个网络协议,位于OSI模型的应用层。自1985年以来,NTP是目前仍在使用的最古老的互联网协议之一。NTP由特拉华大学的David L. Mills设计。
4:server 表示服务器模式 5:broadcast 表示广播模式或组播模式 6:NTP control message 表示此报文NTP控制报文 7:reserved for private use 预留给内部使用 Stratum( 层 ),系统时钟的层数,占用8bits; 0 :unspecified or invalid 未指定或无效 1 :primary server (e.g., equipped with a GPS receiver) 主服务器...
假设时间服务器的地址如下: Time Server Address: Primary:192.168.1.254 Standby:192.168.1.253 AIX: 修改/etc/ntp.conf如下: server 192.168.1.254 prefer server 192.168.1.253 手动发起同步: ntpdate 192.168.1.254 启动NTP服务: startsrc -s xntpd 设置开机启动(其本质是修改了/etc/rc.tcpip文件): /usr/sbin...
shows the network structure of NTP. An NTP synchronization subnet is a network of primary and secondary time servers, clients, and interconnecting transmission paths. Figure 7-2 Network structure of NTPA primary time server is directly synchronized to a primary reference source, usually a radio clo...
想一想,如果我们选择几部主要主机(Primary server)调校时间,让这些Primary Servers的时间同步之后,再开放网络服务来让Client端连线,并且提供Client端调整自己的时间,不就可以达到全部的计算机时间同步化的运作了吗!那么什么协定可以达到这样的功能呢?那就是Network Time Protocol,另外还有Digital Time Synchronization ...
如果我们选择几部主要主机(Primary Server)调校时间,让这些Primary Server的时间同步之后,在开放网络服务让Client段链接,并且允许Client端调整自己的时间,不就可以实现全部计算机的时间同步了吗。那么什么协议可以实现这样的功能呢,那就是Network Time Protocol,即NTP协议,另外还有Digital Time Synchronization Protocol(DTSS)...
synchronised to NTP server (85.199.214.101) at stratum 2 time correct to within 91 ms polling server every 1024 s 或者查看服务状态 $ sudo systemctl status ntpd.service ● ntpd.service - Network Time Service Loaded: loaded (/usr/lib/systemd/system/ntpd.service; disabled; vendor preset: disable...
ntp server 10.10.10.10 #设置时区 clock timezone pst-8 8 ntp clock-period 17179867 2.extreme三层交换机NTP时间同步配置: configure sntp-client primary server 10.10.10.10 #调整时差并取消夏令时 configure timezone +480 noautodst #设置时间同步间隔16284 秒(约5小时) ...
原理:让一部主要的Primary Server校对时间--->开放网络服务让Clients主机来连接 --->Clients自己调整时间。 有关ntp服务的配置参数 ntp服务进程监听在UDP的123端口。 /usr/share/zoneinfo里面存放着世界各个地区的时间区域数据(timezone data),不要企图用文本编辑器直接打开! /etc...