nrf_drv_spi_t 结构体中的 nrfx_spi_t 结构体: typedef struct { NRF_SPI_Type * p_reg; ///< Pointer to a structure with SPI registers. uint8_t drv_inst_idx; ///< Driver instance index. } nrfx_spi_t; nrfx_spi_t 结构体中的 NRF_SPI_Type 就是对应的 SPI 的每个寄存器 第二个参数...
CPHA=1: SPI 总线在时钟先 SCK 的第 2 个跳变沿开始采样数据; 所以它形成如下四种数据传输模式: 二、硬件spi 1、sdk_config.h配置 2、添加spi驱动文件 nrfx_spi.c 新版本SPI兼容库 nrfx_spim.c 新版本SPIM兼容库 nrf_drv_spi.c 老版本SPI基础库 ...
NRF_DRV_SPI_DEFAULT_CONFIG宏用来配置SPI的基本信息。其中SPI_DEFAULT_CONFIG_IRQ_PRIORITY用来配置SPI的中断优先级,在写程序时要注意合理的配置中断优先级,防止两个外设的中断优先级相同,在nRF52832中,中断号为0代表中断优先级最高。 2.2 代码 #include"nrf_drv_spi.h"#include"app_util_platform.h"#include"nr...
串行接口 ADC,I²S,PWM,SPI,UART,USB GPIO 18 电压- 供电 1.7V ~ 5.5V 电流- 接收 3.4mA ~ 10.7mA 电流- 传输 2.3mA ~ 30.4mA 工作温度 -40°C ~ 105°C 安装类型 表面贴装型 封装/外壳 40-VFQFN 裸露焊盘 可售卖地 全国 类型 RF/IF,射频/中频和 RFID 射频收发器 IC 型号 ...
nrf_drv_spi_evt_handler_t handler, void * p_context); In this library function, there are several parameters, which are: *//@param[in] p_instance Pointer to the driver instance structure. This parameter is used to determine which SPI is used, and NRF52840 can allocate 4 SPIs for perip...
static const nrf_drv_spi_t spi = NRF_DRV_SPI_INSTANCE(0); // 使用SPI0。 define SPI_CS_PIN 20 // 定义片选引脚。 3. 初始化SPI接口。 void spi_init(void). { nrf_drv_spi_config_t spi_config = NRF_DRV_SPI_DEFAULT_CONFIG; spi_config.sck_pin = 15; // 定义时钟引脚。 spi_config...
I started at 0.7mA for my whole system if the NRF52840 is in SYSTEM_OFF and the slave in reset, that's way to much. First I noticed, that voidnrf_drv_spi_uninit(nrf_drv_spi_tconst* p_instance) does not reset all used pins but only MISO. I set them all back to default ...
In sdk_config.h // <e> SPI0_ENABLED - Enable SPI0 instance //=== #ifndef SPI0_ENABLED #define SPI0_ENABLED
#define NRFX_PPI_GROUPS_USED_BY_802154_DRV NRF_802154_PPI_GROUPS_USED_MASK #elif defined(NRF53_SERIES) #include <../src/nrf_802154_peripherals_nrf53.h> #define NRFX_PPI_CHANNELS_USED_BY_802154_DRV NRF_802154_DPPI_CHANNELS_USED_MASK #define NRFX_PPI_GROUPS_USED_BY_802154_DRV NRF_802154...
以下SPI 从机接口须包含头文件nrf_drv_spis.h。 #include"nrf_drv_spis.h" 2.1 NRF_DRV_SPIS_INSTANCE 2.2 nrf_drv_spis_init 2.3 nrf_drv_spis_buffers_set 三、SDK配置 点击sdk_config.h文件 选择Configuration Wizard nRF_Drivers 中勾选SPIS相关选项 ...