### 34. **错误:`error: 'nrf_drv_ppi_init' undeclared`** - **原因**:可能没有启用或包含PPI驱动模块。 - **解决办法**: - 确保在`sdk_config.h`中启用了PPI驱动模块(如`PPI_ENABLED`)。 - 确保包含了`nrf_drv_ppi.h`头文件。 ### 35. **错误:`error: 'nrf_drv_timer_init' undeclared...
下面为一段PPI使用代码示例,它实现的功能是:当定时时间到,通过PPI自动去操作IO口 err_code =nrf_drv_ppi_init(); APP_ERROR_CHECK(err_code); err_code= nrf_drv_ppi_channel_alloc(&ppi_channel); APP_ERROR_CHECK(err_code); compare_evt_addr= nrf_drv_timer_event_address_get(&timer, NRF_TIMER_...
*/ static void ppi_init(void) { uint32_t err_code = NRF_SUCCESS; err_code = nrf_drv_ppi_init(); APP_ERROR_CHECK(err_code); APP_ERROR_CHECK(err_code); // Configure 2nd available PPI channel to start timer0 counter at TIMER2 COMPARE[0] match, which is every odd number of secon...
来实现自己的PPI应用编程。 下面为一段PPI使用代码片段: err_code = nrf_drv_ppi_init(); APP_ERROR_CHECK(err_code); err_code = nrf_drv_ppi_channel_alloc(&ppi_channel); APP_ERROR_CHECK(err_code); compare_evt_addr = nrf_drv_timer_event_address_get(&timer, NRF_TIMER_EVENT_COMPARE0); g...
PPI连接事件部分: 1/** @brief Function for initializing the PPI peripheral.2*/3staticvoidppi_init(void)4{5uint32_t err_code =NRF_SUCCESS;67err_code =nrf_drv_ppi_init();8APP_ERROR_CHECK(err_code);910//Configure 1st available PPI channel to stop TIMER0 counter on TIMER1 COMPARE[0] ...
nrf_drv_ppi_init() 该函数主要是用于初始化 PPI 模块,判断 PPI 当前的状态。 nrfx_ppi_channel_alloc() 用于分配未使用的 PPI 通道 nrfx_ppi_channel_enable() 该函数用于使能 PPI 通道,开启 PPI nrfx_ppi_channel_assign() 该函数主要用于分配 EEP 事件终点和 TEP 任务终点 工程使用 创建如下工程结构: 主...
就是在sdk_config.h里面的配置err_code=nrf_drv_timer_init(&TIMER_LED,&timer_cfg,timer_led_event_handler);//timer_led_event_handler为定时器中断,需要额外实现的函数,TIMER_LED,是指使用的那个定时器APP_ERROR_CHECK(err_code);time_ticks=nrf_drv_timer_ms_to_ticks(&TIMER_LED,time_ms);//函数...
nrf_ppi_channel_tmy_ppi_channel;staticvoidgpiote_init(void){ret_code_terr_code;//初始化GPIOTEerr_code=nrf_drv_gpiote_init();APP_ERROR_CHECK(err_code);nrf_drv_gpiote_out_config_tout_config=GPIOTE_CONFIG_OUT_TASK_TOGGLE(true);//绑定输出端口err_code=nrf_drv_gpiote_out_init(PIN_OUT,&out...
1/** @brief Function for initializing the PPI peripheral.2*/3staticvoidppi_init(void)4{5uint32_t err_code =NRF_SUCCESS;67err_code =nrf_drv_ppi_init();8APP_ERROR_CHECK(err_code);910//Configure 1st available PPI channel to stop TIMER0 counter on TIMER1 COMPARE[0] match, which is ...
APP_ERROR_CHECK(nrf_drv_spi_init(&spi, &spi_config, spi_event_handler, NULL)); 2. If there is an interrupt callback function, you must add an appropriate amount of delay to the SPI read and write, as follows: void Single_Command(unsigned char cmd) ...