5G网络中的映射表如表2所示;在5G网络中RSRP分别在层一(Layer1)和层三(Layer3)进行测量和上报。其中:层一(Layer1)的RSRP测量用于波束切换,而层三(Layer3)测量用于小区重选和切换。 Table 2. SS-RSRP mapping table for Layer 1 and Layer 3 measurements. Source: 3GPP TS 38.133. 在层一(Layer1),终端(...
三、5G网络层一与层三映射 5G网络中的映射表如表2所示;在5G网络中RSRP分别在层一(Layer1)和层三(Layer3)进行测量和上报。其中:层一(Layer1)的RSRP测量用于波束切换,而层三(Layer3)测量用于小区重选和切换。 Table 2. SS-RSRP mapping table for Layer 1 and Layer 3 measurements. Source: 3GPP TS 38.133...
我们从3GPP规范38.133中得到两个表:表(A)单值报告和表(B) SS-RSRP和CSI-RSRP差异 :整理：kang...
L1 measurement requires 7 bits payload to represent 128 value mapped to RSRP in dB RSRP Measurement Report Mapping Below table depicts the measurement report mapping forL3SS-RSRP,L1SS-RSRP andL1CSI-RSRP. We have two table available from 3GPP specification 38.133Table (A)for single value reporting...
高层参数 CSI-RS-ResourceMapping IE 给出了与CSI-RS时频资源映射相关的参数。frequencyDomainAllocation 用来表示CDM码组在RB内的偏移。 TS 38.211 用表格的方式(Table 7.4.1.5.3-1)给出了CSI-RS资源映射参数与CSI-RS时频位置的关系。Table 7.4.1.5.3-1中不同行的对应frequencyDomainAllocation不同的映射方式。
3GPP TS 38.214: 5G NR; Physical layer procedures for data channels Related Posts 5G NR Measurements: RSRP, RSSI, RSRQ and SINR 5G NR SS-RSRP Value Measurement Mapping 5G NR RSRQ Measurement and Mapping 5G NR RRM Measurement Requirements 5G NR Measurement – Serving Cell and Neighbor Cell...
Power Definition / Measurement (RSRP, RSRQ, SINR) Power Saving Pre Trial : Overview Pre Trial : Frame Structure Pre Trial : Matlab : Frame Structure / Resource Element Mapping Pre Trial : Physical Signal : PSS Pre Trial : Physical Signal : SSS Pre Trial : Physical Signal : ESS Pre Trial...
➨Refer5G NR MAC Layer >>to understand 5G NR MAC architecture, 5G NR MAC channel mapping, 5G NR MAC procedures and format of 5G NR MAC header and subheaders. 5G NR RLC Layer Function : Provides error correction and retransmission handling. It operates in three modes viz. Transparent Mode...
1.通过CSI-RS-resourceMapping定义的一个slot上的两个CSI-RS资源,或者两个连续slot上的4个CSI-RS资源的时域位置通过以下两个中的一个给出. 对于FR1和FR2,l\in\{4,8\},l\in\{5,9\}或l\in\{6,10\} 对于FR2,l\in\{0,4\}、l\in\{1,5\}、l\in\{2,6\}、l\in\{3,7\}、l\in\{7,...
The Signal Quality Measurements subsystem measures the received signal strength indicator (RSSI), reference signal received power (RSRP), reference signal received quality (RSRQ), and signal to interference & noise ratio (SINR) of the SSS for each valid SSB grid. The UDP send grid, UDP send PS...