Starting Nmap 7.80 ( https://nmap.org ) at 2020-10-23 02:04 EDT Nmap scan report for 10.12.120.41 Host is up (0.0021s latency). Not shown: 992 filtered ports PORT STATE SERVICE 135/tcp open msrpc 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 902/tcp open...
SYN Stealth Scan Timing: About 86.40% done; ETC: 05:24 (0:00:09 remaining) Nmap scan report for 192.168.1.105 Host is up (0.064s latency). All 1000 scanned ports on 192.168.1.105 are filtered MAC Address: F4:D1:08:BE:1C:CA (Unknown) Too many fingerprints match this host to give...
Starting Nmap 7.80 ( https://nmap.org ) at 2020-10-23 02:32 EDT Nmap scan report for 10.12.120.41 Host is up (0.0024s latency). Not shown: 991 filtered ports PORT STATE SERVICE 135/tcp open msrpc 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 808/tcp open...
Starting Nmap 6.40 ( http://nmap.org ) at 2024-03-02 10:12 CST Initiating SYN Stealth Scan at 10:12 Scanning VM-16-4-centos (127.0.0.1) [1000 ports] Discovered open port 8888/tcp on 127.0.0.1 Discovered open port 25/tcp on 127.0.0.1 Discovered open port 22/tcp on 127.0.0.1 Disco...
linux_端口占用扫描port scan How to check if port is in use on Linux or Unix - nixCraft (cyberciti.biz) Run any one of the following command on Linux to see open ports: sudo lsof -i -P -n | grep LISTEN sudo netstat -tulpn | grep LISTEN ...
Nmap scan reportfor10.12.120.41Host is up (0.00091s latency). All1000scanned ports on10.12.120.41are open|filtered Nmap done:1IP address (1host up) scannedin21.55seconds 2.10 -s0 探测 目标主机支持哪些 IP协议 nmap-sO192.168.56.7 Starting Nmap7.80( https://nmap.org ) at2020-10-2302:12EDT ...
Nmap scan report for 192.168.1.100 Host is up (0.0000040s latency). All 1000 scanned ports on 192.168.1.100 are closed Nmap done: 1 IP address (1 host up) scanned in 1.65 seconds 每天学一个 Linux 命令(64):ifconfig 每天学一个 Linux 命令(65):netstat...
结合Nikto Scan 和 Nmap 1. 如何针对单个 IP、主机或目标启动基本 Nmap 扫描 只需键入以下命令即可启动 nmap: nmap 然后,这是超级简单的,只需输入IP地址,如果你的目标! nmap 1.1.1.1 您也可以扫描特定的主机名,只需像这样替换主机名的 IP: nmap hostname.com ...
>: 排除hosts/networks --excludefile <exclude_file>: 从文件中排除列表 HOST DISCOVERY: -sL: List Scan - 只需列出要扫描的目标 -sn: Ping Scan - 禁用端口扫描 -Pn: Treat all hosts as online -- 跳过主机发现 -PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports -...
—scanflags <flags>: 定制TCP包的flags —top-ports <number> :扫描开放概率最高的number个端口 —port-ratio <ratio>: 扫描指定频率以上的端口。与上述—top-ports类似,这里以概率作为参数 —version-trace: 显示出详细的版本侦测过程信息 —osscan-limit: 限制Nmap只对确定的主机的进行OS探测(至少需确知该主...