nmap [Scan Type(s)] [Options] {target specification} 命令参数分为三个部分，Scan Types 指探测类型，如 -PS 指 TCP SYN Ping，-PA 指 TCP ACK Ping，-PU 指 UDP Ping 等等；Options 指探测选项，如 -n 指不对活动的 IP 地址进行反向域名解析，用以提高扫描速度，-R 指对活动的 IP 进行反向域名解...
1. Intense scan (详细扫描) nmap -T4 -A -v 192.168.1.101 2. Intense scan plus UDP (UDP扫描经典使用) nmap -sS -sU -T4 -A -v 192.168.1.101 3. Intense scan, all TCP ports (TCP扫描) nmap -p 1-65535 -T4 -A -v 192.168.1.101 4. Intense scan, no ping (无Ping扫描) nmap -T4 ...
-sR: Check what service uses opened ports using RPC scan --version-intensity <level>: Set from 0 (light) to 9 (try all probes) --version-light: Limit to most likely probes (intensity 2) --version-all: Try every single probe (intensity 9) ...
在准备了必要的IP地址文件,并对主机发现参数优化后,我们就得到最终的扫描命令: nmap -S [srcip] -d –max-scan-delay 10 -oAlogs/tcp-allports-%T-%D -iL tcp-allports-1M-IPs –max-retries 1–randomize-hosts -p- -PS21,22,23,25,53,80,443 -T4 –min-hostgroup 256 –min-rate175 –max-...
结合Nikto Scan 和 Nmap 1. 如何针对单个 IP、主机或目标启动基本 Nmap 扫描 只需键入以下命令即可启动 nmap: nmap 然后,这是超级简单的,只需输入IP地址,如果你的目标! nmap 1.1.1.1 您也可以扫描特定的主机名,只需像这样替换主机名的 IP: nmap hostname.com ...
To make use of this powerful feature, you should: Enable Service and Version Detection using the parameter-sV. Add the option--allportsto scan every single port. By default, Nmap doesn't check port 9100. Many printers use this port, and in some rare cases, Nmap causes them to print. ...
Nmap scan report for 220.181.111.188 Host is up (0.0043s latency). Not shown: 998 filtered ports PORT STATE SERVICE 80/tcp open http 443/tcp open https Nmap done: 1 IP address (1 host up) scanned in 4.06 seconds 1. 2. 3.
结合Nikto Scan 和 Nmap 1. 如何针对单个 IP、主机或目标启动基本 Nmap 扫描 只需键入以下命令即可启动 nmap: nmap 然后,这是超级简单的,只需输入IP地址,如果你的目标! nmap 1.1.1.1 您也可以扫描特定的主机名,只需像这样替换主机名的 IP: nmap hostname.com ...
使用"-Pn"Option可以在扫描之前不发送ICMP包,从而避免防火墙机制被触发。 3.指定扫描的端口范围 nmap-p1-1000www.baidu.com Nmap scan reportforwww.baidu.com (14.215.177.39) Host is up (0.12s latency). Not shown:998filtered ports PORT STATE SERVICE80/tcp open http443/tcp open https ...
In order to generate a report independently of the scan module, you should use the report module. It will search for Nmap raw scan reports in the ~/.das/nmap_<DB_NAME> directory and process and merge them based on either -hosts or -ports option: # Merge outputs by hosts ~$ das repo...