4.直接在test1的project點選右鍵選擇build project,然後在rus an Nios II hardware即可以在console print出hello world 5.如果要讓led閃爍的話可以把led燈改成這以下的code就可以讓led累加了 https://ithelp.ithome.com.tw/upload/images/20220201/201451997eA0sNeD5v.png 參考資料:...
生成的kernel和cycloneII的有点不同,就是多了epcs的四个接口: 一开始还真是不知道该如何来分配器引脚,找了很久,终于找到: In Cyclone® III devices, the EPCS controller does not automatically assign its output pins to the dedicated configuration pins on the FPGA. Instead, the output pins are exporte...
step1:用qsys拉好niosii和板子上pl的連結 step2:在eclipse中將switch的address的值assgin給led的address的值 step3:燒上板子以後開關switch就會讓在其上的led也跟著開關 實驗二(使用niosII console輸入值來控制led的明暗) step1:sopcinfo同實驗一,只有.c檔的code要改 step2:燒上板子以後再在console中輸入...
Hi, I load the DE2_NIOS_DEVICE_LED.sof programming file. Build and run the project; Plug in the USB cable on the USB device port on the DE2
有網友問到如何在Nios II EDS的console輸入數字控制LED顯示,如輸入0則LEDG0亮,輸入1則LEDG1亮,以此類推。這是一個初學者熟悉Nios II與DE2很好的練習。 硬體部分的Nios II,這已經驅動了DE2上最常用的周邊,很適合初學者學習。 軟體部分 hello_world.c / C ...
Nios II之LED实验(SDRAM+EPCS4配置)———基于DE0开发板 看了很多书,查了很多网上资料,看了黑金FPGA的视频,终于实现了LED的实验,感觉不错!特发此博文 基本的不做黑金视频教程的一样,这里不多说,不过我要说明一个问题,就是EPCS4的配置,网上说了(包括Altera公司的解释),其CycloneIII和CycloneII的EPCS配饰不一样...