我想将FPGA 镜像写入USRP RIO设备。我不知道该怎么办。 USRP设备的FPGA image存储在设备内部存储器中。您可以使用 NI-USRP Configuration Utility, NI MAX 和 Digilent Adept等工具通过网络对设备进行编程,以更新或更改FPGA image。根据使用环境的不同,有两种USRP RIO:NI USRP RIO和 Ettus USRP X310。
The driver software media also includes the NI-USRP Configuration Utility, which you can use to update the devices. Refer to the Updating NI 292x Firmware and FPGA Images section of the NI USRP-2920/2921/2922 Getting Started Guide for information on how to update the firmware to a ...
Ettus Research X310**The NI-USRP instrument driver supports TwinRX, UBX, CBX, CBX-120, WBX, WBX-120, SBX, SBX-120, XCVR2450 daughterboards. Other daughterboards may also be compatible, but they have not been tested.Device-specific information about these modules is included in the NI-USRP...
NI-USRP 18.1 has the following requirements:Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor Note LabVIEW NXG and LabVIEW Communications System Design Suite support only 64-bit (x64) processors. RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit) A screen resolution ...
USRP-2954 USRP-2955 Ettus Research USRP2* Ettus Research N200* Ettus Research N210* Ettus Research X300* Ettus Research X310* *The NI-USRP instrument driver supports TwinRX, UBX, CBX, CBX-120, WBX, WBX-120, SBX, SBX-120, XCVR2450 daughterboards. Other daughterboards may also be compatible...
For Phar Lap ETS Real-Time Targets, refer to Real-Time (PharLap) PXI System Initial Configuration and Software Installation. For setting up a PXI controller to use with LabVIEW Communications System Design Suite, refer to Provisioning a Real-Time Controller or USRP Stand-Alone Device for LabVIEW...
The utility is located in the UHD install directory. The default folder is: /usr/local/lib/uhd/utils/ Use 'read all' option to check all the EEPROM settings: ./usrp_burn_mb_eeprom --args=<optional device args> --read-all As an example, the EEPROM settings of an X310 with IP ...