通过路由器网线连接开发板和路由器。系统起来后首先使用“ifconfig”查看开发板 ip。 如下图。 然后查看一下 NFS 服务器的 ip。 可以查看到开发板和服务器在同一网段,如果不在同一网段然后修改开发板的 ip。 使用ping命令测试网络,如下图所示,开发板和 ubuntu 服务器之间的网络是连通的。 在开发板的/mnt目录下...
2.3 selinux沙盒 # 临时关闭setenforce 0# 永久关闭vim /etc/selinux/config# 将selinux=修改为disabled 修改配置文件永久生效要重启服务器; 三、部署 NFS 和 RPC 服务 两台都安装 yum install -y nfs-utils rpcbind# 启动并设置开机自启systemctl start...
AI代码解释 ifconfig eth0192.168.10.11 也可以通过系统右上角的小电脑或者setup命令进行设置。 [wbyq@wbyq 桌面]$ sudo setup 3. 关闭防火墙 代码语言:javascript 代码运行次数:0 运行 AI代码解释 service iptables stop #关闭防火墙 也可以通过setup命令,打开图形配置页面关闭。 4. 重新NFS服务器 代码语言:javascr...
sudo systemctl restart nfs-config sudo systemctl restart nfs-server 设置Slot Table。 执行sudo vim /etc/sysctl.conf 命令,打开 sysctl.conf配置文件,在文件中添加一行如下信息: sunrpc.tcp_max_slot_table_entries=128 执行以下命令,将同时发起的 NFS 请求数量修改为 128。 sudo sysctl -w sunrpc.tcp_...
[root@localhost ~]# showmount -e Export list for test1: /tmp/test0920 11.11.165.0/24 5、设置服务开机自启 Chkconfig rpcbind on Chkconfig --level 345 rpcbind on Chkconfig nfs on Chkconfig --level 345 nfs on 客户端的配置: 1、yum -y install nfs-utils 2、mount -t nfs 11.11.165.115:/...
在NFS服务器上,通过运行ifconfig命令获取其IP地址。 在Mac上挂载NFS共享。 打开“终端”应用程序,运行以下命令: sudo mount -t nfs <NFS服务器的IP地址>:/共享目录的路径 /本地挂载点的路径 将<NFS服务器的IP地址>替换为步骤7中获取的NFS服务器的IP地址,/共享目录的路径替换为步骤5中设置的共享目录路径,/本...
sudosystemctl restart nfs-configsudosystemctl restart nfs-server 设置Slot Table。 执行sudo vim /etc/sysctl.conf命令,打开sysctl.conf配置文件,在文件中添加一行如下信息: sunrpc.tcp_max_slot_table_entries=128 执行以下命令,将同时发起的 NFS 请求数量修改为 128。
并增加: AI检测代码解析 chroot_local_user=YES guest_enable=YES guest_username=virftp virtual_use_local_privs=YES user_config_dir=/etc/vsftpd/vsftpd_user_conf 1. 2. 3. 4. 5. 启动服务: AI检测代码解析 /etc/init.d/vsftpd start 1.
admin:/>change service nfs_config silent_time=80 Command executed successfully. 修改NFS支持32位File ID的客户端。 admin:/>change service nfs_config fileid_length=32 WARNING: This operation will change the type of NFS clients (with 32-bit or 64-bit file ID) supported by the storage array. ...
$ yum install nfs-utils# CentOS 6启动方式;$ service nfs restart$ chkconfig nfs on# CentOS 7启动方式;$ systemctl enable nfs.service$ systemctl start nfs.service 编辑NFS配置文件 $ cat /etc/sysconfig/nfs# mound进程设置固定端口;MOUNTD_PORT=892# quotad进程设置固定端口;RQUOTAD_PORT=875# lockd...