netif_input_fn的函数原型为: typedeferr_t (*netif_input_fn)(structpbuf *p,structnetif *inp) 网卡的数据读取方式,与网卡的具体实现方式相关,所以LwIP的标准库没有定义具体的输入函数,而是定义了一个指向该函数的指针。用户使用时需要先对该指针变量赋值,还需要定义具体的输入函数。与网卡绑定的 netif结构体变量...
ethernetif_input任务代码: voidethernetif_input(void*pParams){struct netif*netif;struct pbuf*p=NULL;netif=(struct netif*)pParams;LWIP_DEBUGF(NETIF_DEBUG,("ethernetif_input: IP input error\n"));while(1){if(xSemaphoreTake(g_rx_semaphore,portMAX_DELAY)==pdTRUE){/* 将接收到的包移动到新的pbuf...
ip_addr_t gw; //网关地址,若目的ip不在同一网络,则将报文发送给网关 netif_input_fn input; //网口调用该函数将数据包传递给ip层 netif_output_fn output; //ip层调用该函数将数据包传递给网口 netif_linkoutput_fn linkoutput; //网口调用该函数将数据包传递给以太网驱动 void *state; #if LWIP_DHCP ...
3.1、netif_add netif_add(struct netif *netif, ip_addr_t *ipaddr, ip_addr_t *netmask, ip_addr_t *gw, void *state, netif_init_fn init, netif_input_fn input) 就是把netif网络接口添加到网络list队列中,向网卡列表中添加一个网卡 3.2、netif_set_default netif_set_default(struct netif *netif...
netif_input_fn input; #if LWIP_IPV4 /** This function is called by the IP module when it wants * to send a packet on the interface. This function typically * first resolves the hardware address, then sends the packet. * For ethernet physical layer, this is usually etharp_output() *...
input:此字段为一个函数,这个函数将网卡接收到的数据交给IP层。 output:此字段为一个函数,当IP层向接口发送一个数据包时调用此函数。这个函数通常首先解析硬件地址,然后发送数据包。此字段我们一般使用etharp.c中的etharp_output()函数。 linkoutput:此字段为一个函数,该函数被ARP模块调用,完成网络数据的发送。上面...
//在netif.h中定义 struct netif { struct netif *next; //指向下一个netif结构体 #if LWIP_IPV4 ip_addr_t ip_addr; //ip地址 ip_addr_t netmask; //子网掩码 ip_addr_t gw; //网关地址 #endif /* LWIP_IPV4 */ netif_input_fn input; //netif数据包输入接口函数指针 #if LWIP_IPV4 netif_...
简单化后的netif structnetif{structnetif*next;//显然可以存在多网卡组成单向链表.#ifLWIP_IPV4ip_addr_tip_addr;ip_addr_tnetmask;ip_addr_tgw;#endif/* LWIP_IPV4 */netif_input_fn input;//网卡数据接收回调函数,面向ip协议netif_output_fn output;//网卡数据发送回调函数netif_linkoutput_fn linkoutput;/...
void *state,err_t (* init)(struct netif *netif),err_t (* input)(struct pbuf *p, struct ...
(&netifGw, configGW_ADDR0, configGW_ADDR1, configGW_ADDR2, configGW_ADDR3); lwip_init(); netif_add(&rndisNetif, &netifIPaddr, &netifNetmask, &netifGw, NULL, EthernetifRndisInit, ethernet_input); netif_set_default(&rndisNetif); netif_set_up(&rndisNetif); //netif_set_li...