/** This function is called when the netif link is set to up or down */ void (* link_...
/** netif网络接口,可以进行正常使用(即lwIP可以正常使用)了 */ #define NETIF_FLAG_UP 0x01U /** 广播通讯的标志 */ #define NETIF_FLAG_BROADCAST 0x02U /** STM32 MAC和PHY可以正常使用 */ #define NETIF_FLAG_LINK_UP 0x04U /** ARP标志 */ #define NETIF_FLAG_ETHARP 0x08U /** TCP/IP...
2012-09-07 14:38 −Dryer (dryer) machine is a kind of commonly used drying apparatus whose operation is simple, the process amount is large. the decision of the heat car... kara liu 0 154 well as Mail carrier soled textiles
LWIP::Interface *interface = our_if_from_netif(netif);nsapi_connection_status_tconnectedStatusPrev = interface->connected;if(netif_is_up(&interface->netif) &&netif_is_link_up(&interface->netif)) {booldns_addr_has_to_be_added =false;if(!(interface->has_addr_state & HAS_ANY_ADDR) && L...
(netif, snmp_ifType_ethernet_csmacd,0x2EA);/* maximum transfer unit */netif->mtu =0x2EA;/* device capabilities *//* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP | NETIF_FLAG_...
netif_set_link_up ### 实现netif_set_link_up的步骤 在Kubernetes中,netif_set_link_up是一个用于设置网络接口状态为链接上的函数,这在网络通信中非常重要。下面我将为你解释如何实现netif_set_link_up的步骤,并提供相应的代码示例。 ### 步骤概览 下面是实现netif_set_link_up的整体步骤概述: | 步骤 | ...
pr_info(PFX"%s: link up\n", dev->name);netif_carrier_on(Adapter->dev); netif_start_queue(Adapter->dev); }return0; } 开发者ID:mikuhatsune001,项目名称:linux2.6.32,代码行数:23,代码来源:Bcmnet.c 示例5: eth_qc_open ▲点赞 1▼ ...
ni_string_dup(&cfg->name, dev->name);if(ni_netdev_device_is_up(dev)) { ni_debug_objectmodel("Skipping gre changeDevice call on %s: ""device is up", dev->name);returnTRUE; }if(!ni_string_empty(cfg->link.lowerdev.name) && ...
netif_set_link_up ### 实现netif_set_link_up的步骤在Kubernetes中,netif_set_link_up是一个用于设置网络接口状态为链接上的函数,这在网络通信中非常重要。下面我将为你解释如何实现netif_set_link_up的步骤,并提供相应的代码示例。 ### 步骤概览下面是实现netif_set_link_up的整体步骤概述: | 步骤 | 描...
(dev);intgroup;/* in default link is down */netif_carrier_off(dev);/* Stop the TX queue - it will be enabled upon PHY status change after link-up interrupt/timer */netif_tx_stop_all_queues(dev);/* fill rx buffers, start rx/tx activity, set coalescing */if(mv_eth_start_...