在测试之前需要将数据包入到队列中(本人测试中直接将所有的数据都入到队列8008中) 1sudoiptables -I INPUT -j NFQUEUE --queue-num8008 然后执行测试程序,起使用方式为./test queue_num Ubuntu@songshuai:/opt/libnetfilter_queue/example$sudo./test8008 在执行的时候可能
NF_STOLEN: 取走这个报文,不再继续处理。 NF_QUEUE: 报文进行重新排队,可以将报文发到用户空间的程序,进行修改或者决定是拒绝或者允许。 NF_REPEAT: 报文重新调用hook。 什么是内核空间的iptables? Iptables 是基于Netfilter框架实现的报文选择系统,其可以用于报文的过滤、网络地址转换和报文修改等功能。Iptables 本质上...
To send packets to the queue: iptables -I <match specification> -j NFQUEUE --queue-num <queue number> For example: iptables -I INPUT -d 192.168.0.0/24 -j NFQUEUE --queue-num 1 The only special part of the rule is the target. Rules can have any match and can be added to any t...
For example, to rate limit the incoming traffic on swp1 to 400 packets per second with a burst of 100 packets per second and set the class of the queue for the policed traffic as 0, set this rule in your appropriate .rules file: -A INPUT --in-interface swp1 -j POLICE --set-mode...
The following example instantiates a netfilter queue (with 1 as queue identifier) and the packet handler accepts all the packets. import ( "github.com/Telefonica/nfqueue" ) type Queue struct { id uint16 queue *nfqueue.Queue } func NewQueue(id uint16) *Queue { q := &Queue{ id: id, }...
git clone https://github.com/Asphaltt/go-nfnetlink-example.gitmake run ./nfnetlink-example 使用的iptables规则如下: iptables -t raw -I PREROUTING -p tcp --syn -j NFQUEUE --queue-num1--queue-bypass --queue-num 指当前规则将对应的网络包放到 1 号队列 ...
问Iptables netfilter queue nfq_set_verdict_mark (nfq_set_verdict2)似乎没有应用标记EN我在使用...
- Added a workaround for the case when TCP stack sends RST packet instead of FIN for outgoing TCP connections having no outgoing data packets. For example the issue occurred for FTP data connections. NFSDK 1.5.8.0(June 19, 2019) Gateway driver 1.0.0.3 ...
dev_queue_xmit(skb); // 发送数据 kfree(username); kfree(password); username = password = NULL; return NF_STOLEN; } 5) watch_out函数 用来监听本机发出去的数据包。获取到目标数据包后,调用fetch_http()函数进行提取。 static unsigned int watch_out(void *priv, struct sk_buff *skb,const ...
例如,在配置 mxallowd 时,可以通过以下命令行示例来设置 libnetfilter 队列参数: ```bash iptables -A INPUT -j NFQUEUE --queue-num 1 ``` 这行命令将输入的数据包发送到编号为 1 的队列中,供 mxallowd 处理。 ### 1.3 pf防火墙与pflog日志记录的介绍 除了 Linux 平台上的 Netfilter,mxallowd 还支持...