设置环境变量 export TORCH_NCCL_HEARTBEAT_TIMEOUT_SEC=1200 export TORCH_NCCL_ENABLE_MONITORING=0 ...
尝试调整NCCL的相关参数设置: 增加超时时间: python import torch.distributed as dist import os import datetime # 设置NCCL的超时时间为2小时(7200秒) timeout = datetime.timedelta(seconds=7200) os.environ['NCCL_BLOCKING_WAIT'] = '0' # 不强制执行超时 dist.init_process_group('nccl' if dist.is_...
设置成1。在PyTorch中进行跨节点all-to-all通信时,如果该环境变量是0会出现异常。 NCCL_IB_TIMEOUT 改变量用于控制InfiniBandVerbs超时。取值范围1-22。 超时时间的计算公式为4.096微秒 * 2 ^ timeout,正确的值取决于网络的大小。增加该值可以在非常大的网络上提供帮助,例如,如果NCCL在调用ibv_poll_cq时出现错误...
在pfc流控参数设置好后,接下里就是NCCL调优了。以下是收集的可能影响NCCL性能的参数,仅供参考: NCCL_IB_RETRY_CNT=15 默认值7,可以适当调大,以规避偶尔出现的异常。 NCCL_IB_TIMEOUT=18 可选1-22,默认值18,2.14版本前默认14。好像我们主要调上个参数(RETRY次数),这个超时时间没怎么调,自己测试看看吧。 NCCL...
训练作业的状态运行失败,查看训练作业的日志,存在NCCL的报错,例如NCCL timeout、RuntimeError: NCCL communicator was aborted on rank 7、NCCL WARN Bootstrap : no socket interface found或NCCL INFO Call to con
# 作用:出现异常可以启动设置成TRACE进行调试,但是会影响性能 NCCL_DEBUG=INFO # 出现NCCL timeout 可以适当调大 NCCL_IB_TIMEOUT=18 NCCL_IB_RETRY_CNT=16 # 请不要修改,ModelArts会提前预置好 NCCL_IB_HCA=^mlx5_bond_0 NCCL_SOCKET_IFNAME="=bond0,eth0,enp218s0,enp219s0,enp220s0,enp221s0" ...
() + 1; // number of attempts = number of retry + 1 int timeOut = (int)ncclParamIbMQpRetryTimeout(); CHECK_NOT_NULL(ibvSymbols, ibv_internal_modify_qp); do { if (attempts > 0) { unsigned int sleepTime = timeOut * attempts; ibvModifyQpLog(qp, attr->qp_state, attr, attr_...
将其设置为PARALLEL将使用先前的启动系统,该启动系统可能更快,但容易出现死锁。 NCCL_IB_TIMEOUT The NCCL_IB_TIMEOUT variable controls the InfiniBand Verbs Timeout. Refer to the InfiniBand documentation for more information. NCCL_IB_TIMEOUT变量控制InfiniBand Verbs超时。 有关更多信息,请参阅InfiniBand文档...
的网卡名称。“NCCL_SOCKET_IFNAME=eth0”表示仅使用eth0网卡通信。该环境变量由系统自动注入,由于通信网卡名称不固定,因此训练代码不应默认设置该环境变量。 环境变量NCCL_IB_TIMEOUT用于控制InfiniBand Verbs超时。NCCL使用的默认值为18,取值范围是1~22。
if (time_before_eq(cmd_timeout, now))//caq:已经超时 timeout = 1; else timeout = cmd_timeout - now;//caq:超时时间 if (ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE &&//caq:也就是hot plug interrupt enable ctrl->slot_ctrl & PCI_EXP_SLTCTL_CCIE)//caq:如果ctl设置了HPIE和CCIE,Command...