display nat static[globalglobal-address|insidehost-address[vpn-instancevpn-instance-name]|interfaceinterface-typeinterface-number[ .subnumber]|aclacl-number] 参数说明 视图 所有视图 缺省级别 1 :监控级 使用指南 在配置了静态NAT之后,查看静态NAT的配置信息。 使用实例 # 查看全局下的静态NAT配置信息。 <Hua...
[FW] nat server s5 zone untrust protocol tcp global 200.1.1.200 21112 inside 172.16.1.2 8080 多个不同内部服务器(如上图中的Server1、Server2)使用一个公网IP地址对外发布时,可以多次使用natserver命令对其进行配置,但是global-port(以上配置中标记红色的参数)不能相同。如此一来Client访问200.1.1.200:21111时...
Totally 1 outbound static NAT mappings. IP-to-IP: Local IP : 10.110.10.8 Global IP : 202.38.1.100 Config status: Active Local flow-table status: Active Global flow-table status: Active Interfaces enabled with static NAT: Totally 1 interfaces enabled with static NAT. Interface: GigabitEthernet1...
执行命令display nat static[globalglobal-address|insidehost-address|interfaceinterface-typeinterface-name|aclacl-number],查看NAT Static的配置信息。 执行命令display nat filter-mode,查看当前的NAT过滤方式。 执行命令display nat mapping-mode,查看NAT映射模式。
nat static inbound net-to-net global-start-address global-end-address [ vpn-instance global-vpn-instance-name ] local local-network { mask-length | mask } [ vpn-instance local-vpn-instance-name ] [ acl { ipv4-acl-number | name ipv4-acl-name } [ reversible ] ] [ rule rule-name ]...
--- address of the WWW server.pager lines 24 logging enable logging buffered debugging mtu outside 1500 mtu inside 1500 asdm image disk0:/asdm512-k8.bin no asdm history enable arp timeout 14400global (outside) 1 interface nat (inside) 1 192.168.100.0 255.255.255.0 ...
[GW-GigabitEthernet0/0/1]nat static global 202.100.1.100 inside 172.16.1.1 注:配置静态NAT时,其中的global-address和host-address必须保证和设备现有地址没有重复,包括设备接口地址,用户地址池地址等,以避免冲突。 测试: display nat static Static Nat Information: ...
· 被移动的NAT规则的global-ip相同或local-ip相同。符合此条件的两条NAT规则中,至少有一条NAT规则引用了ACL。3. 配置步骤(1) 进入系统视图。system-view(2) 配置出方向一对一静态地址转换映射。nat static outbound local-ip [ vpn-instance local-vpn-instance-name ] global-ip [ vpn-instance global-vpn...
Static route entry is configured in the next-hop router and redistributed within the routing network. When the inside global address is matched with the local interface, NAT installs an IP alias and an ARP entry, in which case the router canproxy-arpfor these addresses. If this behavior is...
[NAT-GigabitEthernet0/0/1]nat static global202.103.1.3inside 192.168.1.2 配静态全局转换地址(给PC1),202.103.1.3为未分配外网地址池地址,注:出地址不可设置为接口G0/0/0的IP地址,否则实验失败 2.NAT地址映射 [NAT]interface g0/0/1 [NAT-GigabitEthernet0/0/1]nat serverprotocol tcp global 202.103.1.3...