return ip_public except: logging.error("getting IP failed-ipip API") return '0.0.0.0' def check_ip(ipaddress): ip = '' #读取ip.txt文件判断是否一直 try: logging.info("start reading ip_record_file") fr = open(ip_record_file_name,'r') ip = fr.read() if ip==ipaddress['ip...
[LNS]ip route-static 1.1.2.1 32 1.1.1.2 # 配置私网的IP地址。 [LNS]interface gigabitethernet 2/0/0[LNS-GigabitEthernet2/0/0]ip address 192.168.2.1 255.255.255.0[LNS-GigabitEthernet2/0/0]quit 验证配置结果 # 配置成功后,当PC1上线时,在NAS上执行display pppoe-server session all命令可看到PPPoE...
The radius server nas-ip-address command configures the network access server (NAS) IP address for a RADIUS server group. The undo radius server nas-ip-address command deletes the NAS IP address of a RADIUS server group. By default, no NAS IP address is configured for a RADIUS server grou...
A. 属性NAS-IP-Address表示用户获得的IP地址,最早出现在code=2阶段 B. 属性NAS-IP-Address表示用户获得的IP地址,最早出现在code=4阶段 C. 属性Framed-IP-Address表示用户获得的IP地址,最早出现在code=2阶段 D. 属性Framed-IP-Address表示用户获得的IP地址,最早出现在code=4阶段 ...
peer default ip address pool mypool ppp authentication pap chap vpdn ! ip local pool mypool 192.168.0.10 192.168.0.20 图中的network是桥接到我自己的VMware网卡了 桥接完成后,从物理机ping一下模拟器里面的R1 可以看出从VMware 网卡VMnet1的DHCP服务器中获取到的IP地址为192.168.229.136,用物理机ping 192.168...
vim default 通过取消注释以下行# sradutmp来激活sradutmp: 再次以调试模式重新启动FreeRADIUS。像以前一样发出radclient和radwho命令。您现在应该看到如下内容: radwho Login Name What TTY When From Location alice alice shell S0 Sun 16:34 127.0.0.1
REG_SZ IP address (There is no default value for this entry.)DescriptionIdentifies the network access server (NAS) to use with Remote Authentication Dial-In User Service (RADIUS) accounting. The server is identified by this IP address.The...
ip address 10.7.7.100 255.255.255.255 ! interface Virtual-Template1 ip unnumbered Loopback0 no peer default ip address ppp authentication chap ! interface FastEthernet0/0 description PPPoEoE pppoe enable group bba-pppoeoe ! The following is a sample configuration for the client side: ...
address 192.168.x.x (固定IP地址) netmask 255.255.255.0 (掩码,一般都设置成这样) gateway 192.168.x.1 (路由器IP地址) 其中的x视实际的网络情况而定,比如我用的.2网段,设置好后是这样的: 完成之后需要重启网络服务以使设置生效: systemctl restart networking ...
Enterprise Server 12 SP2 64位:4.4.74-92.35-default及以上 CoreOS CoreOS 2079.4.0 64位:4.19.43-coreos及以上 CIFS客户端检查。 确认Linux操作系统是否已安装CIFS(cifs-utils)客户端或者mount.cifs是否在PATH指定的命令搜寻目录中。 您可参照以下命令查看是否已安装CIFS客户端。如果未安装CIFS客户端或不在指定...