If no light is seen from the IR emitter, then it is likely that the remote is defective. If the remote is emitting an IR signal, but the TV still does not turn on or respond, confirm that nothing is blocking the TV's IR receiver (located underneath the TCL logo). If there’s clea...
If no light is seen from the IR emitter, then it is likely that the remote is defective. If the remote is emitting an IR signal, but the TV still does not turn on or respond, confirm that nothing is blocking the TV's IR receiver (located underneath the TCL logo). If there’s clea...
Confirm that your Wii Sensor Bar is properly connected. If you are using a Wireless Sensor Bar, confirm that the batteries are not drained (replace batteries if needed). This could also indicate your MiniRemote batteries are low and need to be replaced. If you still...
There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV. And if it won't work when you try to use it on your TV, there's a quick check to ...
该操作需登录 Gitee 帐号，请先登录后再操作。5
If you’re usingRemote Desktop, double-check the audio settings on your local Windows device. From Windows Start, search and selectRemote Desktop Connection. Open theLocal Resourcestab. UnderRemote audio, selectSettings…. UnderRemote audio playback, selectPlay on this computer....
The LED light remote runs on batteries, which need to be replaced now and then. So, if you notice issues with the remote and the indicator in the remote not working, it is a sign that your LED light remote has run out of batteries and needs a replacement. ...
Symptoms The following error message is displayed during a build process. Cause Analysis If you get theCould not read from remote repositoryerror when using Git to pull the sub-module from CodeArts Repo, it could be due to either insufficient permissions or incorrect configuration of the.gitmodul...
Why does my phone say "Not Registered on Network" even with a working SIM card? Some possible factors that cause the error message "Not Registered on Network" to pop up despite a working SIM card include: SIM Card Not Properly Activated: Ensure your SIM card is fully activated with your ...
For details, see Checking Whether an Error Occurred During a Remote Login. Checking the ECS Status Check whether the ECS is in the Running state on the management console. If the ECS is stopped, start it and try to log in to the ECS again. Figure 3 Checking the ECS status Checking ...