Assemble the remaining suspension components. NOTE: the rack and pinion mounts will accept both MustangII and later Mustang power rack and pinions. If a later unit is used, an adapter kit will be needed to correctly space out the rack. A rear sump oil pan is required to clear the front ...
shimmed up to its correct position when it is bolted to the radiator support. NOTE: power steering is NOT RECOM-MENDED for this model, due to the light front end weight of the vehicle. Assemble the remaining suspension components and place the vehicle on the ground. Align the front end ...
At least that way, I can also spray the front wells too and start reassembling the suspension. It's the underside of the car that I'm concerned about cleaning as well as the rear suspension. There's at least an inch of mud caked on the undercarriage and that's even after a couple ...
I originally went to purchase some fancy ‘side pipes’ of the day… those that look like you have full headers exiting behind the front tires and then dumping into a big 4″ pipe. (In reality you only had a 2″ pipe feeding that big 4″ unit but it still looked pretty cool. It d...